Loading ...
Loading ...
Loading ...
ANTI-FRICTION RINGS
To swap the rings:
1
2
3
4
INTERCHANGEABLE MAGNETIC FACEPLATE
The Anti-Friction Rings can also be swapped
out and replaced. These rings are made with
high grade self-lubricating materials to
provide a pro-grade finish, so the thumbstick
glides on contact.
To place a ring into a faceplate, push it into place
from the front side aligning the teeth.
Align faceplate with the controller and push to
secure. You will hear the magnets “click” into place.
To remove the ring, push it from the inside of the
front faceplate until release.
Remove the faceplate by lifting it from the
controller chassis using the finger notch on the
top right side of the controller (see diagram on
previous page).
This allows you to customize your controller’s
style. It can be removed by lifting it from the
controller chassis using the finger notch on
the top right side of the controller.
Remove the faceplate by lifting it from the
controller chassis using the finger notch on the
top right side of the controller.
To swap the faceplate:
1
Align the new faceplate with the controller and
push to secure. You will hear the faceplate “click”
into place.
Note: The Anti-Friction Rings on the faceplate
may pop out when attaching the faceplate onto
the controller chassis. If the rings become
dislodged during this action, press the rings
back into the faceplate until you hear a “click.”
2
RESET BUTTON
In the event that you are encountering issues
with your controller, one potential solution
may be resetting your controller. The Reset
Button is positioned beneath the inner right
paddle (P2), and can be pressed using the
SCUF Key (0.9mm) provided or a paper clip. To
remove and replace the paddle: refer to Paddle
Control System section on page 9. Pressing the
Reset Button will restart your controller.
FEATURES & BENEFITS
14
Loading ...
Loading ...
Loading ...