Loading ...
Loading ...
NOTE: No other warranty, written or oral,
is authorized by Philips Electronics North
America Corporation. This warranty gives
you specic legal rights, and you may also
have other rights which vary from
state to state. Some states do not allow
the exclusion or limitation of incidental
or consequential damages, so the above
exclusion and limitations may not apply to
you. *Read enclosed instructions carefully.
45-DAY MONEY BACK GUARANTEE
If you are not fully satised with your
product send the product back and we’ll
refund you the full purchase price.
The product must be shipped prepaid
by insured mail, insurance prepaid, have
the original sales receipt, indicating
purchase price and date of purchase,
and the money-back guarantee return
authorization form enclosed.
We cannot be responsible for lost mail.
The product must be postmarked no later
than 45 days after the date of purchase.
Philips reserves the right to verify the
purchase price of the product and limit
refunds not to exceed suggested retail price.
To obtain money-back guarantee return
authorization form, call 1-800-243-3050 for
assistance.
Delivery of refund check will
occur 6–8 weeks after receipt of returned
product.
- You can use the precision trimmer to
create ne lines and contours around
your facial style, close to the skin
(Fig. 15). Simply pull the cutting element
straight o (Fig. 13) and insert the
precision trimmer (Fig. 14).
Detail trimming without comb
You can use the detail trimmer to create ne
lines and contours around your facial style,
close to the skin.
1 Remove the cutting element (Fig. 13)
and attach the detail trimmer (Fig. 14).
2 Switch on the product.
3 Hold the detail trimmer perpendicular
to the skin and move the detail trimmer
upwards or downwards with gentle
pressure (Fig. 15).
Detail trimming with comb
You can use the detail trimmer with
the detail comb attached for precision
trimming of your sideburns, moustache or
beard. There are 2 dierent detail trimming
combs: M (3mm) and L (5mm)
1 Attach the detail trimming comb onto
the detail trimmer (Fig. 16).
2 Switch on the product.
3 To trim most eectively, move the
product against the hair growth
direction. Make sure that the surface of
the comb always stays in contact with
the skin (Fig. 17).
4 Switch o and clean the product after
each use.
Cleaning
Only the cutting element and combs can
be cleaned with water.
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as
gasoline or acetone to clean the product.
We advise you to empty the hair-
collection chamber after each trimming
session. When you trim long, dense
beards, it may also be necessary to empty
the hair-collection chamber during the
trimming session in order to maintain
optimal suction performance.
1 Switch o the product and disconnect it
from the power outlet.
2 Wipe the housing of the product with a
dry cloth.
3 Remove the comb (Fig. 10) and clean it
with the cleaning brush and/or rinse it
under the tap (Fig. 18).
Only the cutting element and combs
can be cleaned with water.
4 Remove the cutting element and clean
it under the tap (Fig. 19).
Shake o excess water and leave to dry
completely.
Never dry the cutting element with a
towel or tissue, as this may damage
the trimming teeth.
5 Shake and/or brush out the hairs that
have collected in the hair chamber
(Fig. 20, Fig. 21). Use the cleaning
sponge to remove the hairs in the
corners of the hair chamber.
6 After cleaning, reattach the cutting
element (Fig. 22) and comb (Fig. 8)
to the product.
This product has no other user-
serviceable parts. For assistance call
1-800-243-3050.
Storage
- Be sure the product is turned o.
Remove cord from outlet and product
before storing in a safe, dry location
where it will not be crushed, banged, or
subject to damage.
- Do not wrap cord around the product
when storing.
- Store cord in a safe location where it
will not be cut or damaged.
- Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid.
Disposal
- This appliance contains a rechargeable
lithium-ion battery which must be
disposed of properly (Fig. 23). Contact
your local town or city ocials for
battery disposal information. You can
also call 1-800-822-8837 or visit
www.call2recycle.org for battery
drop-o locations.
- For assistance, visit our website
www.philips.com/
support or call
1-800-243-3050 toll free.
- Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused. For recycling information,
please contact your local waste
management facilities or visit
www.recycle.philips.com
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050. Online information is
available 24 hours a day, 7 days a week.
Full Two-Year Warranty
Philips Electronics North America
Corporation warrants this new product
(except cutters and combs) against
defects in materials or workmanship for
a period of two years from the date of
purchase, and agrees to repair or replace
any defective product without charge.
IMPORTANT: This warranty does not
cover damage resulting from accident,
misuse or abuse, lack of reasonable
care, the axing of any attachment not
provided with the product or loss of parts
or subjecting the product to any but the
specied voltage or batteries.*
NO RESPONSIBILITY IS ASSUMED
FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply
go to www.philips.com/norelco or call
1-800-243-3050 for assistance.
It is suggested that for your protection you
return shipments of product by insured
mail, insurance prepaid. Damage occurring
during shipment is not covered by this
warranty.
Loading ...
Loading ...
Loading ...