Loading ...
Loading ...
Loading ...
5
WARNING! To prevent damage to the transmis-
sion, do not pull the machine backwards with the trans-
mission engaged.
2.4 Converter control lever (if tted)
In the models with drive systems, the converter control
provided near the control lever.
IMPORTANT The engine must be running and the drive
engaged when switching from one speed to another.
Do not touch the converter control when the engine is
stopped. Doing this could damage the converter.
NOTE If the machine does not move forward with the le-
ver in the « » position, simply move the lever to « » and
then immediately return to the « » position.
IMPORTANT The engine must be running and the drive
engaged when switching from one speed to another.
Do not touch the converter control when the engine is
stopped. Doing this could damage the converter.
2.5 Cutting height adjustment
• Type “I”
• Type “II”
to the desired position.
3. GRASS CUTTING
NOTE This machine can be used to mow lawns in a num-
ber of different ways; before starting work, prepare the ma-
chine based on how the lawn is to be mowed.
DO THIS WHEN THE ENGINE IS OFF.
3.1a Preparation for mowing and grass collection
by the grass catcher:
– Lift the rear discharge guard (1) and fasten the grass
3.1b Preparation for mowing and rear grass
discharge on the ground
-
3.1c Preparation for mowing and
mulching (where applicable)
-
3.1d Preparation for mowing and side discharge of
grass (where applicable)
-
-
-
-
– Release the side discharge chute (8).
– Lift the rear discharge guard (1).
3.2 Engine ignition
• Models with throttle
To start the engine, set the throttle control to “Starter”
(23).
When the engine is running, set the throttle control to
“Fast” (22).
3.2a
• Manual ignition models (“I”)
• Electric key ignition models
3.2b
• Electric push-button ignition models (“III - “IV” -
“V”)
-
“III - “IV”
handle (1).
•
•
• -
NOTE Keep pulling the engine / cutting means brake or
the engine will stop.
-
es on (7).
details on the engine.
Loading ...
Loading ...
Loading ...