Loading ...
Loading ...
Loading ...
Possible Cause Solution
Powercordnotfirmlypluggedin.
Problem
DryerWill
Not Run
Firmly plug in dryer. Use a new UL
approved 30 amp power supply cord.
Replace fuses or reset breakers.
Fuses blown or circuit
breakers tripped.
Using a regular fuse. Replace with a time-delay fuse.
Dryer door not firmly closed. Close dryer door tightly,
START pad not pressed. Press START pad.
Cycle not selected. Select cycle and press START pad.
Lint in Load Lint screen is clogged. Clean lint screen. Check for air
movement.
Improper sorting. Sort lint giversfrom lint takers
and by color.
Load is too big or heavy. Dry smaller loads so lint can be
carried to the lint screen.
Load is overdried. Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see "Dryer Use").
Paper or tissuein pockets. Clean out pockets before drying.
Pilling being mistaken for lint. Pilling (surface fuzz) is caused by
normal wear and laundering.
Stains on Load Improper use of fabric softener Use fabric softener sheets in dryer.Add
in washer, at beginning of cycle when load is cold.
Drying soiled items. Items need to be clean before
being dried.
Items Overdrying. Match dryer settings to fabric type
Shrinking (see "Dryer Use").
Poor garment quality. Check quality of garment before
purchasing.
Manufacturer's care label Follow fabric care label instructions
instructions not followed, carefully.
Loads are Overloading. Dry smaller loads thatcan tumble freely.
Wrinkled Overdrying. Match dryer settings to fabric type
(see "Dryer Use").
Load left in dryer at the Remove load as soon as tumbling
end of cycle, stops.
Odors Have you recently been painting, If so, ventilate the area.When the
staining, or varnishing in the odors or fumes are gone from the area,
area where you dryer is located? re-wash and dry clothing.
First use of dryer element. Odor will be gone after the first cycle.
Unusual Thumping of rollerswhen Thump will go away after 5 minutes
Sound dryer has had a period of of drying.
non-use.
31
Loading ...
Loading ...