Loading ...
Loading ...
Loading ...
www.NutrichefKitchen.com
5
OPERATING THE APPLIANCE
To open the lid and boil water
Pull the lid opening lever up to
open the lid and fill water into
the water tank.
• Always fill water above the minimum
water level mark and below the
maximum water level mark.
• Refer to the water level mark in the
water tank.
To close the lid
Close the lid by pressing down until it
clicks
• Do not close the lid by force.
1. Insert the receptacle
into the power inlet.
2. Then, insert the plug
to the wall outlet.
WARNING: Do not power on the
appliance if the water tank is empty.
• Connect the plug to the power inlet
horizontally.
BOIL
KEEP WARM
1. “Boil” indicator light
will be on during
boiling process.
BOIL
KEEP WARM
2. It will switch to
“keep warm”
automatically
after the water is
boiled.
• Do not open the lid or dispense water
while the water is boiling.
• Do not contact any parts of your body
to the steam vent.
• Do not place cloth or any other items
to cover the steam vent.
Pouring hot water
1. Note: The hot water may
not dispense smoothly
right after boiling.
2. Press on the “DISPENSE”
button to dispense hot
water.
• CAUTION: Always keep hands or any
parts of your body from the water
outlet for a second or two right after
you press the dispense button.
• Do not press the dispense button when
the inner water reservoir is empty.
• You cannot dispense hot water by
pressing the dispense button, or cup
switch if the thermo pot is unplugged.
Refill water
When water reaches to “refill
water” line, add water for
automatic re-boil.
• Do not add water above maximum
water level mark.
• Boil water below the refill mark may
cause malfunction.
To re-boil water under keep warm
mode
• It takes about 3 minutes to re-boil water
(with full water tank).
• Before re-boiling the water, make sure the
water level is above the refill mark.
• When adding water into the water tank, be
careful the hot steam from the steam vent
and water tank.
• Once the re-boil button is pressed, the
boiling process will begin and you cannot
reset any button until it turns to keep
warm mode.
• Do not press the re-boil button
continuously (after re-boiling process) as it
may cause malfunction.
Loading ...
Loading ...
Loading ...