Loading ...
Loading ...
Loading ...
www.NutrichefKitchen.com
4
CONTROL PANEL
USING THE THERMO POT FOR THE FIRST TIME
1. Wash and rinse water tank with water.
2. Fill water up to full mark.
3. Boil once and discard the water by pumping it out.
REMOVE AND ATTACH THE LID
Detach Lid
Place the handle towards the rear side of the thermo pot. Then open the lid by
pulling up the lid opening lever (caution: be careful of the steam from the steam
vent). Position the lid at 45 degree and pull out the lid from the hinge holder by
pressing the hinge lock.
Note: Never remove the lid while the water is boiling.
Attach Lid
Place the handle towards the rear side of the thermo pot. Press the hinge lock, at the
same time insert the shaft of the hinge of the lid into the hinge holder. Ensure that
the lid is attached properly and close the lid until it clicks.
Loading ...
Loading ...
Loading ...