Loading ...
Loading ...
Loading ...
INSTALLING THE BUTTON TYPE BATTERY
Installing the button type battery in the remote control
1, Turn the battery holder counterclockwise (as indicated with (®) mark) using your
fingernail or a coin to open it. The battery holder opens.
2, Insert the battery into the battery holder with the positive (+) terminal facing down and
press it firmly until you hear a locking sound.
3, Place the battery holder back in the remote control, match its (®) mark with the (O)
mark on the remote control, and turn the battery holder clockwise to lock it.
Precautions regarding the button type battery
,, There is a danger of explosion if button type battery is incorrectly replaced. Replace
only with the same or equivalent type.
,, Do not pick up the batten/using tweezers or other metal tools. This will cause a short
circuit.
,, Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk
of explosion.
Z_ Keep the button type battery out of the reach of the children.
WAR,,.QShould any battery be swallowed, consult a doctor immediately.
USING THE CRADLE
The cradle is a connection plate which can be used to make the
camcorder more stable when charging the battery, or connecting to
an external device _ PC, etc.).
o
If you connect your HD camcorder to the provided cradle
using more than one type of cable to output image, the order
of priority of the output signal is as follows:
USB cable -, Component/Multi AV cable.
Do not connect the connection cables at the same time, it
Cradle
F receptacle
DC IN ja¢k
;: ponoo ou,,,_Av
may cause conflict and may not work properly. If this occurs, '°_
remove all the connected cables and try the connection
again.
English 11
Loading ...
Loading ...
Loading ...