Loading ...
Loading ...
Loading ...
STEP 10 - ASSEMBLE HEIGHT ADJUSTMENT
PIN
Place the height adjustment pin (U) into the height
adjust bracket. Assemble a spring (W) and washer (H)
onto the height adjustment pin (U) and then secure
them using a cotter pin (Q). See figure 7.
STEP 12 -ASSEMBLE LOWER TUBES
Fit the ends of the two lower hopper tubes into the
ends of a rear hopper tube. Align the holes in the ends
of the tubes and insert plastic plugs (S). See figure 9.
REAR
HOPPER
TUBE
PLASTIC PLUG (S)
LOWER
TUBE
FIGURE 9
FIGURE 7
STEP 13 - ASSEMBLE TUBES TO BAG
• Unfold the hopper bag, reversing the mesh wind
screen and then lay the bag out flat with the wind
screen on top.
Insert the ends of the assembled upper hopper tubes
down through the stitched sleeves in the sides of the
hopper bag and then slide the tubes back underneath
the wind screen. See figure 10.
STEP 11 - ASSEMBLE UPPER TUBES
Fit the ends of the two upper hopper tubes into the
ends of a rear hopper tube. Align the holes in the ends
of the tubes and insert plastic plugs (S). See figure 8.
REAR
HOPPER
TUBE
UPPER
HOPPER
TUBE
FIGURE 10
STITCHED SLEEVE
UPPER
HOPPER
TUBE
HOPPER
BAG
BOTTOM
FIGURE 8
7
Loading ...
Loading ...
Loading ...