Loading ...
Loading ...
Loading ...
10
First touch a cycle from the “What to
Wash” and then select the “How to Wash”
to get the best combination cycle available
for the type of items you are going to wash.
See “Cycle Guide” for cycle details. Red,
green, and blue LED lights come on below
the Time/Status display when the “How to
Wash” ColorLast cycle is selected. Not all
cycles are available on all models.
Estimated Time Remaining will light up with a cycle time.
You may notice time adjusting during the cycle. This is
normal.
If you do not want to begin a cycle immediately, you may
choose the Delay Start option.
To choose a delay time:
1. Touch the Delay Start button to select desired delay time.
Time will increase in hour increments up to 12 hours.
2. Touch and hold the Start/Pause button for 3 seconds
to start delay start time.
IMPORTANT: When delaying a cycle, use liquid HE
detergent only in the dispenser. Powdered detergents may
absorb moisture from a previous cycle and clump before
the wash cycle begins.
To cancel delay start:
1. Touch the Power button to cancel Delay Start.
To pause delay start:
1. Touch the Start/Pause button to pause Delay Start.
2. Touch and hold the Start/Pause button again to start
Delay Start time.
8. Select the type of load to wash
9. Select cycle modifiers
Once you select a cycle, the default modifiers or the previous
set modifiers for that cycle will be lit. Touch the cycle settings
buttons to change the Soil Level, Spin Speed, and Temperature,
if desired. Not all settings are available with all cycles.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your items. If not sure which temperature
to use, refer to the chart below or select a cooler temperature.
7. Touch Power button to turn
on washer
Make sure the dispenser drawer is closed completely, then
touch the Power button to turn on the washer.
Temperature suggestions
Light soils
Colors that
bleed or fade
Heavy soils
Whites
Pastels
Moderate soils
Bright colors
NOTE: Even for cold wash settings, some warm water
may be added to the washer to maintain a minimum
temperature.
Loading ...
Loading ...
Loading ...