Loading ...
Loading ...
Loading ...
Using the unit
Operating the Radio
Press Function / Result
The ‘On / Standby’ button
1
o
n remote control or
17
o
n the unit
To switch on the unit.
The ‘Function’ button
3
o
n remote control or
8
o
n the unit
Press this repeatedly until the display shows ‘Radio’.
Adjust the antenna
22
o
n the unit
To improve FM radio reception.
The ‘FM Mode’ button
5
o
n remote control or
12
o
n the unit
To select the desired mode i.e. ‘Mono’ or ‘Stereo’. In some cases, where reception is
poor, it may be advisable to select the ‘Mono’ mode, to improve the clarity of the
radio signal.
The ‘Back’
4
or the ‘Next’
6
button on the remote
control. Or the ‘Back’
11
or the ‘Next’
13
button on
the unit.
RELEASE IMMEDIATELY.
To ‘Scan’ (manually adjust) the radio’s frequency ‘Up’ or ‘Down’ by 1-step at a time.
The radio’s LCD will indicate the exact frequency position. When a desired frequency
or station is reached. It can be saved into one of the ‘Memory’ positions (see ‘Radio
Memory’).
The ‘Back’
4
or the ‘Next’
6
button on the remote
control. Or the ‘Back’
11
or the ‘Next’
13
button on
the unit.
HOLD FOR 2 SECONDS.
To ‘Seek’ (automatically adjust) the radio’s frequency ‘Up’ or ‘Down’ to the next
available radio station. The radio’s LCD will indicate the exact frequency of the station it
has found. When a desired frequency or station is reached. It can be saved into one of
the ‘Memory’ positions (see ‘Radio Memory’).
Radio Memory
At any time, the currently displayed radio station or frequency can be stored into one of the memory positions. There
are 30 memory positions for FM band. Switch your radio on and tune it to the desired radio station then follow the
instructions below.
Press Function / Result
The ‘Memory / Recall’
button
8
on the remote
control or
14
o
n the unit.
This activates the ‘Radio Memory’ programming mode. Press MEM +
13
or MEM –
11
button on the unit to select desired Memory Position.
The ‘Memory / Recall’
button
8
on the remote
control or
14
o
n the unit.
PRESS ONCE
To save the radio station to the selected ‘Memory Position’.
To recall any saved radio station, simply press MEM +
13
or MEM –
11
button on the
unit to scroll through saved radio stations.
To clear the memory of any radio stations simply save a new radio station to the same
Memory Position.
7
Loading ...
Loading ...
Loading ...