Loading ...
Loading ...
Loading ...
REFRIGERATORUSE
Openingand ClosingDoors
(French door models)
There are two refrigerator compartment doors. The doors can be
opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
• When the left side door is opened, the hinged seal
automatically folds inward so that it isout of the way.
• When both doors are closed, the hinged seal automatically
forms a seal between the two doors.
IMPORTANT:
The recommended setting should be correct for normal
household refrigerator use. The controls are set correctly
when milk or juice is as cold as you like and when ice cream
is firm.
Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has
cooled completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature
controls to a colder than recommended setting will not cool
the compartments any faster.
Ifthe temperature istoo warm ortoo cold inthe refrigerator or
freezer, first check the air vents to be sure they are not
blocked before adjusting the controls.
To Turn Off/On:
Style I Press the freezer down arrow touch pad until a
dash (-) appears in both the refrigerator and freezer displays.
Neither compartment will cool.
Style 2 Turn the freezer control to the word OFF Neither
compartment will cool when the freezer is set to OFF
A. Hinged seal
Usingthe Controls
The temperature controls are located at the top front ofthe
refrigerator or freezer compartments.
Temperature Controls
Humidity Control (on some models)
The humidity control turns on a heater to help reduce moisture on
the door hinge seal. Use in humid environments or when you
notice moisture on the door hinge seal. The refrigerator uses
more energy when Humidity Control is on.
• Press the control to ON when the environment is warm and
more humid, or if you notice moisture onthe door hinge seal.
• Press the control to OFF to save energy when the
environment is less humid.
HumidityControl
On Off
For your convenience, the temperature controls are preset at the
factory. When you first install your refrigerator, make sure the
controls are stillset to the recommended setting as shown.
Style I
Recommended Setting "4"
@0 @ ' CR'LooL'' _' @ 0 @
COLO FREEZER COLOER Recommer_dSerdngs:4 cc_ REFRI6ERATOROCHER
ColdestSettings:7
Style 2
Recommended Setting "4"
Adjusting Controls
If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed inthe chart below as
a guide.
For (Style 1) controls press the up or down arrow touch pads, or
for (Style 2) controls turn the dial to adjust the temperature.
Except when starting the refrigerator, do not adjust either control
more than one setting at a time. Wait 24 hours between
adjustments for the temperature to stabilize.
CON DITION/REASON: ADJUSTMENT:
REFRIGERATOR too warm REFRIGERATOR
Control one setting
higher
FREEZER too warrs/too little ice FREEZER Control one
setting higher
REFRIGERATOR too cold REFRIGERATOR
Control one setting
lower
FREEZER too cold FREEZER Control one
setting lower
12
Loading ...
Loading ...
Loading ...