INSTALLATION · OPERATION · MAINTENANCE GUIDE - Page 5

For SC900WTS. Also, The document are for others Scandium models: SC900WRS

Loading ...
Loading ...
Loading ...
Page 5
3. Maintenance and Service
Stainless steel is very easily damaged during installation if scratched or knocked by tools. Protect the
rangehood with the cardboard box or a plastic bag during installation.
CAUTION: Accessible parts may become hot when used with cooking appliances.
This appliance must be installed and repaired by a qualied technician.
It is dangerous to modify any part of this appliance. Modication of any kind, will void the warranty.
The manufacturer declines all responsibility in case of failure to adopt proper safety measures.
Please consult local laws and regulations and install in accordance.
Use an electrical connector with earth that is correct for your location.
Check that the voltage in your area corresponds to the appliance as indicated on the rating label.
This appliance must be connected to an electrical supply with a ground connection.
Check that the installation and electrical connections are made by a qualied technician and indicated
instructions and local regulations in force are met, using materials that are compliant with the applicable
legislation.
The company will not be responsible for any installations executed by non-qualied persons and
installations that fail to heed the applicable legislation on electrical safety (with regard to both modes and
materials).
The electrical technical data can be found inside the rangehood, after removing the grease lters.
The exible power cable supplied is already connected internally and emerges from the rangehood near the
air outlet tube.
Maintenance and Service
Cleaning and user maintenance shall not be made by children without supervision.
Always switch off and disconnect power before cleaning.
The rangehood surface should be cleaned with a soft cloth and non-corrosive detergent. Wash with warm
soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any
part of this appliance. Always make sure to dry the appliance after cleaning and never leave wet, as this will
cause irreparable damage.
Clean the interior of the rangehood with a damp cloth and a neutral detergent or methylate spirits.
For better results, you can use a high quality cleaning and protection product (eg. Steel Kleen) to clean
rangehood.
Do not leave the rangehood surface wet after cleaning.
Particular care must be taken with the aluminium lters which must be periodically cleaned (at least every
month, this will vary depending on cooking frequency and type of foods cooked).
Remove the grease lters and wash them either by hand using hot soapy water or in the dishwasher using
Loading ...
Loading ...
Loading ...