Loading ...
Loading ...
Loading ...
10
11ninjakitchen . co.uk
3 Place the Pro Extractor Blades®
Assembly on the top of the cup
and turn clockwise to seal.
2 Add ingredients to the Single-Serve
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
1 Plug in motor base and place on a
clean, dry, level surface such as a
worktop or table.
7 Remove the blade assembly by
twisting anti-clockwise. DO NOT
store blended contents with the
blade assembly attached. Only use
the Spout Lid to cover. Exercise
care when handling the blade
assembly, as the blades are sharp.
8
To enjoy on the go, place the Spout
Lid onto the cup and twist lid
clockwise until firmly sealed.
9
Unplug the unit when finished. Refer
to the Care & Maintenance section
for storing instructions.
6 Remove the cup from the motor base
by turning it anti-clockwise and then
lifting up.
5a
If using an Auto-iQ® program, select
the program that best suits your
desired output. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program
again.
5b
If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop.
4 Turn the cup upside down and install
on the motor base by aligning the
tabs on the cup with the slots on the
base. Then, rotate cup clockwise until
it clicks. Once locked in place, the
programs will illuminate and the unit
will be ready for use.
BLENDING INSTRUCTIONS
IMPORTANT: Review all warnings on
pages 4-7 before proceeding.
Loading ...
Loading ...
Loading ...