Loading ...
Loading ...
Loading ...
1110
Setting the Timer
The timer function works in all
operating modes and switches the
unit into standby mode after the
selected number of hours have
elapsed.
The Tower Fan incorporates an eight
hour, count down timer, which allows
the fan to switch itself off after 1, 2, 4
or 8 hours.
Press the TIMER button once to
activate the timer setting. The timer
will then be set to turn off the fan
in 1 hour and the 1h indicator will
illuminate on the control panel
display.
Press the TIMER button again, to
set the fan to switch itself off after
2 hours, and the 2h indicator will
illuminate on the control panel
display.
Similarly, pressing the TIMER button
a 3rd or 4th time will set the fan to
switch itself off after 4 or 8 hours, and
the relevant setting will illuminate on
the control panel display.
To cancel the TIMER press the timer
button continuously until none of the
timer indicator lights are illuminated
on the control panel display
(See fig.5).
Using the Remote Control
The remote control buttons operate
in the same way as those on the fan
control panel.
Your remote control takes 2 x AAA
Batteries.
1. Ensure that the tower fan is
switched OFF and disconnected
from the power outlet before
cleaning.
2. Use a clean, dry cloth to clean
the external surfaces of the tower
fan. If the tower fan has collected
dirt inside the unit, have the unit
cleaned by a qualified service
agent. Do not operate the tower
fan in this condition.
3. Do not attempt to open the case
of the tower fan at any time as
there are no customer serviceable
parts inside.
4. When not in use, remove the base
stand and screw connection ring
to the stem on the base. Store the
tower fan (preferably in its original
box) in a cool, clean and dry
location.
Using Your Kambrook ArcticTower Fan continued
Care, Cleaning and Storage
Fig. 5