Loading ...
Loading ...
Loading ...
• 6 •
Estimated run-times
APPLIANCE TYPE EST WATTAGE
EST USAGE
Cell phone 4 watts 13 hrs
Fluorescent light 4 watts 15 hrs
Radios, fans 9 watts 6.7 hrs
Depth nder 9 watts 6.7 hrs
Camcorder 15 watts 4 hrs
Electrical tool 24 watts 2.5 hrs
Electric cooler 48 watts 1.3 hrs
Car vacuum, air compressor 80 watts 0.8 hrs
NOTE: Actual time may vary. Times are based on the internal battery being fully charged.
6. MAINTENANCE INSTRUCTIONS
6.1 After use and before performing maintenance, unplug and disconnect the jump starter.
6.2 Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery clips, cords and the
jump starter case.
6.3 Ensure that all of the jump starter components are in place and in good working condition.
6.4 All servicing should be performed by qualied service personnel.
7. MOVING AND STORAGE INSTRUCTIONS
7.1 Store inside, in a cool, dry place.
7.2 Do not store the clips on the handle, clipped together, on or around metal, or clipped to cables. The clips
on the jump starter are live when the switch is in the ON position and will produce arcing or sparking if
they come in contact with each other. To prevent accidental arcing, always place the switch in the OFF
position and keep the clips on the storage holders when not using it to jump start a vehicle.
7.3 If the jump starter is moved around the shop or transported to another location, take care to avoid/
prevent damage to the cords, clips and jump starter. Failure to do so could result in personal injury or
property damage.
IMPORTANT: Do not use and/or store the jump starter in or on any area or surface where damage
could occur if the internal battery should unexpectedly leak acid.
7.4 IMPORTANT:
• CHARGE IMMEDIATELY AFTER PURCHASE
• KEEP FULLY CHARGED
Charge the jump starter’s internal battery immediately after purchase, after every use and every 30 days.
All batteries are affected by temperature. The ideal storage temperature is at 70°F. The internal battery will
gradually self-discharge (lose power) over time, especially in warm environments. Leaving the battery in a
discharged state may result in permanent battery damage. To ensure satisfactory performance and avoid
permanent damage, charge the internal battery every month.
8. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The unit won’t jump start my car. Clamps are not making a good
connection to the battery.
Connections are reversed.
The unit’s battery is not charged.
The vehicle’s battery is defective.
The unit is not turned on.
Check for poor connection to
battery and frame. Make sure
connection points are clean.
vDisconnect the unit and reverse
the clamps.
Press the Battery Status button on
the front of the unit. The LEDs will
indicate the status of charge.
Have the battery checked.
Turn the unit ON/OFF switch to the
ON position.
Loading ...
Loading ...
Loading ...