Loading ...
Loading ...
Loading ...
– 12 –
9. ASSEMBLY
9.1 CONNECTION TO THE AIR
SUPPLY – FIG.2
Whip hose:
To connect the air sander to an air line, a ¼”BSP
male thread whip hose will be required. The
connection must be tight for an airtight union.
9.2 ATTACHING THE HOOK & LOOP
SHEETS – FIG.3
Note: Disconnect the air supply prior to carrying
out maintenance, servicing or adjustment.
This sander is equipped to accept hook & loop type
sanding sheets. Simply align the edges of the
sanding sheet with the backing pad and press
together firmly.
If the pad is a non punched type use a suitable tool
to pierce the sheet in the appropriate areas. This
will aid with dust removal, reducing the hazard.
9.3 DUST COLLECTION – FIG.4
The sander is not supplied with a dust extraction
hose (3.1). To connect a dust extraction hose,
insert into (3.1) the dust outlet port (3)firmly.
Attach the other end of hose to a suitable vacuum
dust extractor.
Note: Always wear a protective dust mask in
addition to these measures.
2
3
FIG.
FIG.
4 FIG.
(3)
(3.1)
Loading ...
Loading ...
Loading ...