Loading ...
Loading ...
Loading ...
11
A
FM antenna
When receiving an FM broadcast, extend this antenna
and position it for the best reception.
After moving this unit, readjust the position again.
B
Digital audio output connectors
These output digital audio. Connect these to the audio
input connectors of devices capable of receiving dig-
ital audio.
COAXIAL: RCA coaxial digital cable
OPTICAL: Optical digital cable (TOS)
C
Analog audio output connectors
These output 2 channels of analog audio. Connect a
stereo amplifier or powered speakers to them.
Use RCA audio cables for connections.
Connect the R connector of this unit to the right (R)
connector (or equivalent) of the amplifier and the
L connector of this unit to the left (L) connector (or
equivalent) of the amplifier.
D
DC power connector (DC IN 12V)
After all other connections have been completed,
connect the included GPE015A-120125-D AC adapter
to this connector and connect the AC adapter power
cord to the adapter.
Then, connect the AC adapter power cord plug to an
AC power outlet.
V
Do not use any power cord other than the
one included with this unit. Use of other
power cords could result in fire or electric
shock. Unplug the cord from the outlet
when not using the unit for a long time.
Precautions for use
V
Misuse of batteries could cause them to
rupture or leak leading to fire, injury or
the staining of items nearby. Please read
and observe the precautions on page 3
carefully.
o When using the remote control, point it toward the
remote control signal receiver on the main unit from a
distance of 5 m (16 ft) or less. Do not place obstructions
between the main unit and the remote control.
o The remote control might not work if the remote control
signal receiver on the main unit is exposed to sunlight or
bright lights. In this case, try moving the main unit.
o Beware that use of this remote control could cause the
unintentional operation of other devices that can be
controlled by infrared rays.
Installing batteries
Remove the cover on the back of the remote control, and
insert 2 AAA batteries into the case, aligning them with the
¥
and
^
indications. Replace the cover.
When to replace batteries
If the operation range of the remote control decreases, the
batteries have become exhausted. In this case, replace the
batteries with new ones.
Dispose of the used batteries according to the instructions
on them or requirements set by your local municipality.
Using the remote control
Loading ...
Loading ...
Loading ...