ONE-YEAR LIMITED WARRANTY
This Polsen product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. The
warranty provider’s responsibility with respect to this limited warranty
shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product
in its intended manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the warranty provider.
If the product has been discontinued, the warranty provider reserves
the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Polsen Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Polsen along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.polsenaudio.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Polsen is a registered
trademark of the
Gradus Group.
© 2021 Gradus Group LLC.
All Rights Reserved. GG1
PRODUCT
MANUAL
INLINE XLR
MICROPHONE
PREAMPLIFIER
XP-30D
THANK YOU FOR CHOOSING
POLSEN.
The Polsen XP-30D adds 30 dB of clean gain to
any low-output dynamic or ribbon mic that needs
a little extra gain boost before it reaches the input
of your preamp or mixing board. Its XLR input and
output make it simple to set up, and it operates on
48 V phantom power but doesn’t pass it through
to protect sensitive ribbon mics from damage. The
XP-30D’s metal construction and compact size are
made for travel, and it will stand up to live shows
and repeated use when recording.
SPECIFICATIONS
Gain +30 dB
I/O 3-pin XLR female input
3-pin XLR male output
Frequency response 20 Hz to 20 kHz
Impedance 22 kΩ
Noise <1 mV
Operating voltage 48 V (phantom power)
Material Metal
Dimensions (L × W × H) 4.5 × 1.25 × 1 in. (11.4 × 3.2 × 2.5 cm)
Weight 3.45 oz. (98 g)
CONNECTING THE XP-30D
Make sure 48 V phantom
power is turned on.
USB
ON
OFF
XP-30D
INPUT
OUTPUT
OR
ONE-YEAR LIMITED WARRANTY
This Polsen product is warranted to the original purchaser to be free
from defects in materials and workmanship under normal consumer
use for a period of one (1) year from the original purchase date or
thirty (30) days after replacement, whichever occurs later. The
warranty provider’s responsibility with respect to this limited warranty
shall be limited solely to repair or replacement, at the provider’s
discretion, of any product that fails during normal use of this product
in its intended manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the warranty provider.
If the product has been discontinued, the warranty provider reserves
the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse,
neglect, accident, alteration, abuse, improper installation or
maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY
PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specific legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Polsen Customer Service
Department to obtain a return merchandise authorization (“RMA”)
number, and return the defective product to Polsen along with the
RMA number and proof of purchase. Shipment of the defective
product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.polsenaudio.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Polsen is a registered
trademark of the
Gradus Group.
© 2021 Gradus Group LLC.
All Rights Reserved. GG1
