Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
39
Installation notes
A flush-fit cooktop is suitable only for
installation in natural stone (granite,
marble), solid wood, and tiled counter-
tops. Certain models are also suitable
for building into glass countertops –
these are marked with an appropriate
note in “Installation – Installation di-
mensions”. When using a countertop
made from any other material, please
check first with the countertop manu-
facturer that it is suitable for installing
a flush-fit cooktop.
The internal width of the base unit un-
derneath the appliance must be at
least as wide as the inner countertop
cut-out (see “Installation – Installation
dimensions”), so that the cooktop is
easily accessible from underneath af-
ter installation and the bottom half of
the casing can be removed for mainte-
nance. If the underside of the cooktop
is not freely accessible after installa-
tion, any sealant used must be re-
moved to enable the cooktop to be
lifted out of the cut-out should this be
necessary.
Natural stone countertops
The cooktop is set directly in the cut-
out.
Solid wood countertops, tiled coun-
tertops, glass countertops
The cooktop is secured inside the cut-
out with wooden battens. The frame
must be provided on site and is not
supplied with the appliance.
Sealing strip
Dismantling the cooktop for service
purposes may damage the sealing
strip underneath the edge of the
cooktop.
Always replace the sealing strip be-
fore reinstalling the cooktop.
Loading ...
Loading ...
Loading ...