Loading ...
Loading ...
Loading ...
Your electric pressure washer requires some assembly but is
quickly ready for use.
If you have any problemswith the assembly of your
pressurewasher, please caii the pressurewasher heJpJine
at 1=800-222-3136.
UNPACKTHEPRESSUREWASHER
1. Removeeverything from carton.
2. Ensureyou have all included items prior to assembly.
CARTONCONTENTS
Check aii contents. If any parts are missing or damaged, call
the pressure washer helpline at 1-800-222-3136.
• Main unit
• Spray gun
• High pressure hose
• Plastic wand
• Quick connect spray tips (3)
• Parts bag (which includes the following):
• O-ring Kit
• Operator's manual
• Owner's registration card
Becomefamiliar with each piece before assembling the
pressure washer, identify all contents with the illustration
on page 5. If any parts are missing or damaged,call the
pressure washer helpline at 1-800-222-3136.
ASSEMBLINGPRESSUREWASHER
Your Craftsman pressure washer will need assembly before
operation:
1. Fill out and send in registration card.
2. Lubricateo-rings.
3. Connect pressure hose to spray gun and pump.
4. Connect water supply to pump.
5. Attach plastic wand to spray gun.
6. Attach quick connect spray tip to plastic wand.
LubricateO-Rings
Lubrication of o-rings is extremely important for installation
and operation. The use of a lubricant (petroleum or synthetic
grease) during assembly helps seat o-rings properly and
provides an improved seal. It also helps protect the o-ring
from damage by abrasion, pinching or cutting and extends
the life of the o-ring.
NOTICEALWAYS apply a small amount of lubricant on
o-rings prior to assembling the high pressure hose (pump
end) (A), high pressure hose (gun end) (B), garden hose to
the pump (C), and plastic wand (gun end) (D).
Lubricateall connectionsshownbelow, following these
instructions:
1. inspect and clean connecting surfaces prior to lubrication
and assembly.
2. Uselubricants sparingly during assembly; a light film is
all that is required.
3. Usea small brush or cotton swab to apply grease directly
to o-rings where they are not accessible (QCfitting, M22
fitting).
Loading ...
Loading ...
Loading ...