Loading ...
Loading ...
Loading ...
6
www.KALORIK.com
RVC 46111 - 201010
NOTE: Remove the foam blocks beside the bumper before use.
• Place the charging base on a hard, level surface and against a wall.
• Remove objects within 3 ft. / 1 m of the left and right side and within 6 ft. / 2
m of the front of the charging base.
• Connect the round connector of the adapter into the power socket on the
charging base and the other end into a wall outlet.
• Press the AUTO button on top of the vacuum to turn the unit on.
Alternatively, you can press the START/PAUSE button on the remote or by
using the Kalorik Home app.
NOTE:
‒ Install the charging base in a location that the vacuum can easily
access. It is recommended to place the charging base against a wall,
and on a hard-level surface rather than on rugs or carpets.
‒ Always keep the charging base plugged in, otherwise the vacuum will
not automatically return to it.
Remote Control
Open the back compartment of the remote control. Insert 2 AAA batteries
inside and close the compartment.
Charging the Vacuum
The vacuum has a pre-installed rechargeable battery that must be fully
charged (approximately 4-6 hours) before use. The vacuum returns to the
charging base at the end of a cleaning cycle or when its battery is running low.
There are two ways to initially charge the vacuum when it has no power:
‒ Option 1: Attach the vacuum to the charging base by aligning its
charging pins with the charging pins on the base.
Loading ...
Loading ...
Loading ...