Loading ...
Loading ...
Loading ...
12
Connecting to cabinets
Connect the S-Box (SNOW-1810U) and the cabinet to the installed cabinet for video signal
transmission.
"
Connect the S-Box to the external device before connecting the S-Box to the cabinet.
"
Before connecting power to the cabinets, connect the Interface Gender (I/G) to the cabinets
first.
"
Connect only one type of LED pitch cabinets to a single S-Box. Normal picture quality may
not be obtained if different types of cabinets are connected. Do NOT use different types of
LED pitch cabinets together.
HDBT OUT
HDBT IN
DATA OUT (Forward)
DATA IN DATA OUT
DATA IN (Reverse)
DATA IN DATA OUT
S-Box
(SNOW-1810U) First cabinet
Connecting cable for redundancy
Last cabinetI/G Card
IER IFR IER IFR
IER-F IFR-F IER-F IFR-F
1
Connect the HDBT ports on the S-Box and I/G cards using a LAN cable.
2
Connect I/G cards and cabinets using OCM cables.
"
Use a cable of CAT 6 (*STP type) or higher.
*STP: Shielded Twisted Pair
"
Connect the HDBT by using a LAN cable that is 15–100 m in length. If you use a cable that is
out of specified length range, the signal quality may be unstable.
"
Use the LAN cables recommended on the HDBaseT website (http://hdbaset.org/hdbaset-
recommended-cables). If a LAN cable that is not recommended is used, the HDBT signals
may become unstable.
Loading ...
Loading ...
Loading ...