Loading ...
Loading ...
Loading ...
EN-8
EN
Steam Cleaner
SSC 3001YL
Copyright © 2020, Fast ČR, a.s. Revision 05/2020
Attaching and removing the exible hose
• On to the nozzle of the steam cleaner A2 attach the exible hose A0 so that the symbol “I”
marked on the hose connector A0 is aligned with the same symbol on the steam cleaner. Rotate
the hose connector A0 by 90° anticlockwise. Now the “I” symbol marked on the hose connector
A0 will be aligned with symbol “II” on the steam cleaner.
• Remove the exible hose A0 in the reverse sequence.
Attaching and removing the basic straight nozzle
• On to the nozzle of the steam cleaner A2 attach the basic straight nozzle A7 so that the symbol
“I” marked on the nozzle connector A7 is aligned with the same symbol on the steam cleaner.
Rotate the nozzle A7 by 90° anticlockwise. Now the “I” symbol marked on the nozzle connector
A7 will be aligned with symbol “II” on the steam cleaner.
• It is also possible to connect the basic straight nozzle A7 to the exible hose A0, by seating
the nozzle connector A7 on to the nozzle of the exible hose A0 and turnig nozzle A7 90°
anticlockwise. This will rmly connect these two parts.
• Remove the basic straight nozzle A7 in reverse sequence.
Attaching and removing the round brush and bent nozzle
• You can seat the round brush Aqs and the bent nozzle Aqg on to the nozzle of the steam cleaner
A2, the basic straight nozzle A7 or the exible hose A0. Accessories need to be properly attached
so that they do not come loose during use.
• Remove the brush Aqs and nozzle Aqg in reverse sequence.
Attaching and removing the minimop and textile sleeve
• On to the nozzle of the steam cleaner A2 attach the minimop Aqd so that the symbol “I” marked
on the minimop Aqd is aligned with the same symbol on the steam cleaner. Rotate the minimop
connector Aqd by 90° anticlockwise. Now the “I” symbol marked on the minimop connector Aqd
will be aligned with symbol “II” on the steam cleaner.
• You can also use the minimop Aqd with the exible hose A0. First attach the exible hose A0 onto
the steam cleaner according to the instructions contained in subchapter Attaching and removing
the exible hose. Then on to the nozzle of the exible hose A0 attach the minimop Aqd and turn
the minimop connectorqd by 90° anticlockwise. This will rmly connect these two parts.
• Pull the textile sleeve A6 on to the head of the minimop Aqd.
• Remove the minimop Aqd and the textile sleeve A6 in reverse sequence.
Attention:
Allow the minimop Aqd and the textile sleeve A6 to fully cool down before removal.
Attaching and removing the window and mirror cleaning attachment
• On to the nozzle of the steam cleaner A2 or the exible hose A0 attach the minimop Aqd
(without the textile sleeve A6) according to the instructions contained in subchapter Attaching
and removing the minimop and textile sleeve.
• To the head of the minimop Aqd connect the window and mirror cleaning attachment Aqf so
that both tabs at the bottom of the attachment Aqf slide into the holes in the bottom part of the
minimop head Aqd. Then push the attachment Aqf against the head of the minimop Aqd, until the
tab in the top part of the attachment Aqf attaches to the top edge of the minimop head Aqd.
• When removing the attachment Aqf, rst release the tab in the top part of the attachment Aqf by
lifting it up. Then tilt the attachment Aqf away from the minimop head Aqd and slide the tabs in
the bottom part of attachment Aqf out of the openings in the bottom part of the minimop Aqd.
Loading ...
Loading ...
Loading ...