Loading ...
Loading ...
Loading ...
EN - 4
to come into contact with eyes, skin
and, above all, do not ingest them.
– DO NOT dispose of batteries
with domestic waste.
– DO NOT burn.
– DO NOT place batteries where they
could become part of a local waste
– Take them to an authorized
recycling centre.
5. BATTERY CHARGER
SPECIFICATIONS
CG 500 Li 48, CG 700 Li 48
Input: 220-240V ~ 50 Hz
1.5A
CGF 500 Li 48, CGF 700 Li 48
Input: 220-240V ~ 50 Hz
3A
CGD 500 Li 48 ,CGD 700 Li 48
Input: 220-240V ~ 50 Hz
1.5A
1.5A
• The equipment shall not be exposed to dripping
or splashing, and no liquid container, such as
pots, shall be placed above the equipment.
• The charger is designed for rechargeable
lithium-ion batteries. Some other types
of batteries may explode, resulting in
personal injury and property damage.
• Only charge rechargeable batteries.
•
and a steady green when charging is complete.
•
be replaced; if the cable is damaged, the
whole transformer must be disposed of.
• The line voltage can be disconnected
by pulling the mains socket.
• The socket must be positioned close to
the tool and must be easily accessible.
CHARGING PROCEDURE
NOTE Battery is shipped not fully charged. It
is recommended to charge it before use to ensure
that the maximum operating time is reached.
The lithium-ion battery does not have a charge
memory and can be recharged at any time.
1. Connect the charger to an AC outlet.
CG 500 Li 48
CG 700 Li 48
CGF 500 Li 48
CGF 700 Li 48
2
1
3
1
2
3
CGD 500 Li 48
CGD 700 Li 48
2
3
1
1
This is a diagnostic charger. The LED charger
communicate the current battery status.
CG 500 Li 48 - CGF 500 Li 48 - CGD 500 Li 48
CG 700 Li 48 - CGF 700 Li 48 - CGD 700 Li 48
DESCRIPTION LED STATUS
Battery charging Flashing green
Fully charged Green
Overheated battery:
(remove for approx. 30 min.
Red
No battery
Faulty battery
(remove and replace
Flashing red
CHECKING THE CHARGER
If the battery pack does not charge properly:
• Check the output power with another tool.
Make sure that the outlet is not isolated.
• Check the charger contacts against short
circuit caused by debris or other materials.
If the battery is inserted into the charger
when it is hot or overheated, the LED LOAD
indicator light on the charger may light RED.
In this case, let the battery cool down out
of the charger for about 30 minutes.
Loading ...
Loading ...
Loading ...