Mountfield C 415 DU 48V STIGA ePower Lithium-ion battery dual standard charger is interchangeable

OPERATOR’S MANUAL - Page 4

For C 415 DU. Also, The document are for others Mountfield models: BT 520 LI 48, BT 540 LI 48, BT 550 LI 48, BT 720 LI 48, BT 740 LI 48, BT 750 LI 48, BT 775 LI 48, CG 500 LI 48, CGD 500 LI 48, CGF 500 LI 48, CG 700 LI 48, CGD 700 LI 48, CGF 700 LI 48

PDF File Manual, 12 pages, Read Online | Download pdf file

C 415 DU photo
Loading ...
Loading ...
Loading ...
EN - 2
T5A/250V
Fuse
T3.15A/250V
Fuse
CE conformity marking
Do not dispose of this product
with domestic waste.
3. BATTERY
SPECIFICATIONS
BT 520 Li 48, BT 720 Li 48
Battery: 48V Max., 86,4 Wh
Cell voltage: 3.6V ; Number of cells:12
Charging time: 90 min.
(using a CG 500 Li 48 Charger, CGD 500 Li 48
Charger, CG 700 Li 48 Charger, CGD 700 Li 48

Charging time: 50 min.
(using a CGF 500 Li 48 Charger, CGF 700 Li 48

BT 540 Li 48, BT 740 Li 48
Battery: 48V Max., 172,8 Wh
Cell voltage: 3.6V ; Number of cells: 24
Charging time: 180 min.
(using a CG 500 Li 48 Charger, CGD 500 Li 48
Charger, CG 700 Li 48 Charger, CGD 700 Li 48

Charging time: 110 min.
(using a CGF 500 Li 48 Charger, CGF 700 Li 48

BT 550 Li 48, BT 750 Li 48
Battery: 48V Max., 216 Wh
Cell voltage: 3.6V ; Number of cells: 24
Charging time: 220 min.
(using a CG 500 Li 48 Charger, CGD 500 Li 48
Charger, CG 700 Li 48 Charger, CGD 700 Li 48

Charging time: 120 min.
(using a CGF 500 Li 48 Charger, CGF 700 Li 48

BT 775 Li 48
Battery: 48V Max., 216 Wh
Cell voltage: 3.6V ; Number of cells: 24
Charging time: 330 min.
(using a CG 500 Li 48 Charger, CGD 500 Li 48
Charger, CG 700 Li 48 Charger, CGD 700 Li 48

Charging time: 180 min.
(using a CGF 500 Li 48 Charger, CGF 700 Li 48

For proper use, maintenance and storage of the
battery, it is important to read and understand
the instructions provided in this manual.

hazards, explosions and dangers from
electric shocks and electric arcs:
DO NOT probe the charger with conductive
materials. The charging terminals
can withstand a voltage of 120 V.
If the battery pack case is broken or
damaged, DO NOT insert it into the charger.
Replace it with a new battery pack.
DO NOT charge these battery packs

DO NOT allow liquid to get inside the charger.
DO NOT use the charger for other purposes

DO NOT attempt to short-circuit
the battery pack terminals.
If chemicals in the battery come
into contact with the eyes, wash them
immediately with clean water for at
least 15 minutes. Seek medical care
immediately. Do not recharge the battery
pack in rain or humid conditions. Do
not immerse the tool, battery pack or
charger in water or other liquids.
Be aware that the battery pack or charger
do not overheat. If they are hot, let them cool
down. Charge only at room temperature.
Do not cover the ventilation grids on the top
of the charger. Do not place the charger on a
soft surface such as a blanket or pillow. Keep
the ventilation grids of the charger clean.
Prevent small metal objects or materials
such as steel wool, aluminium foil,
or other extraneous particles from
entering the charger cavities.
Unplug the charger before cleaning or
when there is no battery pack inside.
DO NOT place the battery pack in direct
sunlight or in a warm environment. Always
keep it at a normal room temperature.
DO NOT attempt to connect two
chargers at the same time.
If the battery is not charged for a long
time, it should always be stored in the
shade, in a cool and dry place.
Charge the battery for 2 hours every 2 months.
The cells in the battery pack may leak if used
too much or at extreme temperatures.
If the outer seal breaks and chemicals in the
battery come into contact with the skin:
wash immediately with soap and water,
Loading ...
Loading ...
Loading ...