Loading ...
Loading ...
Loading ...
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
1 (844) 538-7890
04
WARNING!
DO NOT TOUCH SURFACE BURNERS OR AREAS NEAR THESE BURNERS
Surface burners may be hot after use, even though the flame is not visible or
contact the surface directly. Areas near surface burners may become hot enough
to cause burns during and after use. Do not let clothing or other flammable
materials to contact with areas near surface burners until they have had sufficient
time to cool down.
WARNING!
NEVER use this appliance as a space heater to heat or warm the room.
Doing so may result in carbon monoxide poisoning.
Installation Instructions
Be sure the rangetop is properly installed and grounded by a qualified technician.
It is the responsibility of the technician to make certain that your rangetop is
properly installed. Situations cause by improper installation are not covered under
the warranty. Any expenses incurred due to such situations will not be paid by the
manufacturer of the rangetop.
Leak testing of the appliance shall be conducted according to the manufacturer’s
instructions, or according to local building codes and gas regulations in your area.
GAS CONNECTIONS (All Units)
NOTICE TO MASSACHUSETTS APPLIANCE DEALERS:
Be sure this document is included in all gas rangetop appliances sold to consum-
ers in the State of Massachusetts.
NOTICE:
Massachusetts law requires the following:
• Appliances must be installed by a licensed plumber or gas fitter.
• Appliances must be connected with a 3 ft (36″ maximum length)
flexible gas connector.
• A “T” handle type manual gas valve in the gas supply line to the appliance.
Have the dealer where you purchase your new rangetop install it or have them
recommend a qualified installer. Installation must conform with local codes. In the
absence of local codes, the installation must conform with the National Fuel Gas
Code, ANSI Z223.1-Latest Edition in the U.S.A. or the CAN/CGA B149.1 or .2
Installation Codes in Canada.
Loading ...
Loading ...
Loading ...