Loading ...
Loading ...
Loading ...
8 - ENGLISH ENGLISH - 9
LED INDICATIONS AND START UP
Pairing button
(Pairing mode)
Power LED
System LED
Power button
Power on
Search state
Setup mode or pairing mode
Playback state
Idle mode / network standby mode (sleep mode)
During start up (power ON the speaker) the power LED will ash fast.
Note: When you power ON the speaker it will always start up in Wi-Fi mode.
When the speaker is powered ON it will start by being in “search state” trying to search for and connect to the
last Wi-Fi network. During this state, both LED’s will be doing a double ash. The same will happen (double
ash) if the speaker is put into “Bluetooth mode”, where you are now able to establish connection with a
previously paired Bluetooth device.
In “Wi-Fi mode” the speaker will automatically enter the “setup mode” within 20 seconds, if the speaker during
“search state” does not successfully re-connect to the previous Wi-Fi network.
In “setup mode” both LED’s will ash continuously. Same LED behavior will occur if the speaker is set into
“Bluetooth pairing mode”. For “setup mode” and “pairing mode”, read more on page 10.
During playback both LED’s will be ON (solid) and the color of the system LED (Purple, Blue, Green) will indicate
what “mode” the speaker is in (Wi-Fi playback, Bluetooth playback, AUX playback).
LED or LED’s will be breathing slowly indicating “no action” or “I am sleeping”.
“Idle mode” will happen as soon as music is paused (no action).
“Network standby mode” will happen if there is no action for 20 mins. When speaker is in Network standby
mode, the speaker power consumption is less than 2W.
LED INDICATIONS AND START UP
s-Living One & Three - Buttons
Loading ...
Loading ...
Loading ...