Loading ...
Loading ...
Loading ...
1616
7 Day Timer
1. Select ‘7 Day Timer’ under ‘Add a Rule’.
2. Choose a time that you would like to set one of the
following 6 available modes
3. Select a mode from the drop down list.
- Power Off
- Power On - Auto Temperature
- Power On - Heating
- Power On - Cooling
- Power On - Dry
- Power On - Fan
4. If Power On - Auto Temperature or Heating or Cooling is
selected then you can set the temperature which will be run
in that mode.
Select “Add” to add this 7 day
timer rule to rule set.
Zones will not be changed.
Open Lounge and Bedroom 1
zone and close off all others.
Zone Control
Should your Wi-Fi Control be connected to a compatible
ducted system and zone controller you will have a further
setting.
You can select to change the zone settings with this rule, or
to leave the zones unchanged/what they were previously set
to.
When actioned, Wi-Fi Control will ensure comfort is delivered
only to where it is needed most, closing off/opening up
zones as required and ensuring energy is not wasted on
vacant area/zones.
Zones now displaying a tick beside them will be opened
(Zones displaying an eye symbol are zones which are not
visible for operation – if one of these zones is selected for this
rule to apply, it will still open and will cause an over-ride and
this zone will be displayed in the heat pump control screen).
Important
When the rule finishes, zones will remain as per the rule
settings.
5. Next, select which days you would like this rule to run. By
default all days are selected.
6. Lastly select ‘Add’ to add this rule to your rule set.
Loading ...
Loading ...
Loading ...