Snapper 7800232 NSPV21675E lawn mower

User Manual - Page 19

For 7800232.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Troubleshooting
PROBLEM
EngineWill Not Start
Using Recoil Starter
EngineWill Not Start
(ElectricStart Models)
EngineStalls or Stops
After Running
Engine Loses Power
ExcessiveVibration
Mower Will Not Move
Loss Of Traction
Transmission Noise
Ground Speed
TooFast/ TooSlow;
Unableto Adjust
Ground Speed
Cutting Grass Improperly
Poor Grass Discharge
Oil Leaking
PROBABLECAUSE
1. Fueltank empty. 1.
2. Engineneedspriming. 2.
3. Sparkplug wire disconnected, 3.
1. Fueltank empty. 1.
2. Engineneedspriming. 2.
3. Sparkplug wire disconnected. 3.
CORRECTIVEACTION
Fillfuel tank with fresh fuel.
Prime. CheckEngineManualfor Instructions.
Placespark plug wire onto sparkplug.
Fillfuel tank with fresh fuel.
Prime. CheckEngineManualfor Instructions.
Placespark plug wire onto sparkplug.
4. Wiring harnessdisconnected. 4. Connectwiring harness.
5. Batterydead. 5. Chargeor replacebattery.
1. Bladecontrol is releasedor is not being held 1. Bladecontrol should be held securely against
securely against handle.
2. Fueltank empty.
3. Engineair pre-cleanerand or air cleanerdirty.
4. Sparkplug defective or gap set improperly.
5. Water,debris or stale fuel in fuel system.
1. Engineair pre-cleaneror air cleanerdirty.
2. Sparkplug faulty.
3. Water,debris or stale fuel in fuel system. 3.
1. Damaged,out of balanceor bent mower blade.1.
2. Looseblade components. 2.
3. Looseor missing air lift (if equipped). 3.
4. Lumpy or frayed belt. 4.
1. Build-up of debris on or around wheel drive 1.
components.
2. Transmission cableadjustment required. 2.
3. Drive belt requires replacement. 3.
4. Damagedtransmission. 4.
1. Transmission cableadjustment required. 1.
2. Damagedtransmission. 2.
1. Build-up of debris on or around wheel drive 1.
control components.
2. Transmission cableadjustment required. 2.
3. Drive belt requires replacement. 3.
4. Damagedtransmission. 4.
1. Cutting heighttoo low or high. 1.
2. Forward speedtoo fast. 2.
3. Cutting bladedull or damaged. 3.
1. Forward speedtoo fast. 1.
2. Grassis wet. 2.
3. Excessivelyworn or damagedblade. 3.
4. Build up of grass clippings and debris under 4.
deck.
5. Improper blade installed on deck.
6. Bladeinstalled improperly on deck.
1. Leakingengine case.
handle at all times during operation of mower.
2. Fillwith fuel to proper level.
3. Cleanfree of all debris.
4. Service spark plug.
5. Drainand cleanfuel system.
1. Cleanor replacefilters.
2. Service spark plug.
Drainand cleanfuel system.
Service mower blade.
Service and tighten loose parts.
Replaceair lifts. Tighten to proper torque.
Replacebelt.
Cleandebris.
Adjust transmission cable.
Replacedrive belt.
Contact authorized SNAPPERdealer.
Adjust transmission cable.
Contact authorized SNAPPERdealer.
Cleandebris.
Adjust transmission cable.
Replacedrive belt.
Contact authorized SNAPPERdealer.
Adjust cutting height.
Adjust to a slower speed.
Sharpen cutting edgesor replaceblade.
Adjust to a slower speed.
Mow when grass is dry.
Service mower blade.
Cleandeck.
5. Install proper SNAPPERblade.
6. Install blade properly.
1. Contact authorized SNAPPERdealer.
2. Checkand tighten drain plug.
3. Makesure dip stick or oil filler cap is securely in
)lace.
€'D
=3"
mo
-.1
17
Loading ...
Loading ...
Loading ...