Loading ...
Loading ...
Loading ...
11
- Use safety gloves.
- Ensure the oven is cold before carrying out the following
operations.
- Disconnect the appliance from the mains power supply.
REMOVING THE DOOR
To remove the door:
1. Open the door fully.
2. Lower the catches and push them forwards as far as they will go (fig. 1).
3. Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is
released (D) (fig. 2).
To refit the door:
1. Insert the hinges in their seats.
2. Open the door fully.
3. Lift the two catches.
4. Close the door.
REMOVING THE SIDE GRILLES
To press down the grilles and lift up as shown in fig. 3.
REPLACING THE OVEN LAMP
To replace the two rear lamps (fig. 4):
1. Disconnect the oven from the power supply.
2. Unscrew the lamp cover (Fig. 5), replace the lamp (see note for lamp
type) and screw the lamp cover back on.
3. Reconnect the oven to the power supply.
N.B:
- Only use 25W / 230V type E14, T300°C incandescent lamps.
- The lamp used in the appliance is specifically designed for electrical
appliances and is not suitable for household room illumination
(Commission Regulation (EC) No 244/2009).
- Lamps are available from our After-sales Service.
WARNING
Maintenance
(fig. 1)
(fig. 2)
(fig. 3)
(fig. 4)
(fig. 5)
Loading ...
Loading ...
Loading ...