Loading ...
Loading ...
Loading ...
13
sharkclean.co.uk
12
Press the handvac release button and disconnect
the handheld vacuum from the wand.
To remove the dust cup from the handheld vacuum,
press the Dust Cup Release button near the handheld
vacuum nozzle. Tilt the dust cup and lift o to remove.
To empty dust and debris, hold the dust cup over the
bin, then slide the Lid Release slider forward.
To empty the Dust Cup while it is attached to the
handheld vacuum, position the dust cup over a dust
bin and slide the Lid Release slider forward.
Remove debris from the dust screen by tapping it
gently or wiping it with a dry cloth as needed. To
clean the interior of the dust cup, rinse it with water.
Place it on its side to air-dry for at least 24 hours
before reinstalling.
EMPTYING THE DUST CUP
REMOVING AND CLEANING THE DUST CUP
MAINTAINING YOUR VACUUM CLEANER
1
1
2
2
Press the dust cup release button and remove the
dust cup. Pull the foam and felt filters out of the
back of the dust cup.
Remove the dust cup. Pull the post-motor filter out
of the handheld vacuum.
MAINTAINING YOUR VACUUM CLEANER
PRE-MOTOR FILTER POST-MOTOR FILTER
CLEANING THE FILTERS
To clean filters, rinse them with water only. Allow all filters to air-dry completely for at least 24 hours before
reinstalling to prevent liquid from being drawn into electricparts.
Clean the pre-motor filters at least once
a month and post-motor filter at least once a year. Tap o loose dirt between washes when needed. More
frequent cleaning may sometimes be necessary with heavy use.
IMPORTANT: DO NOT use soap when cleaning the filters. Use water only.
NOTE: To order filters and other parts, visit sharkclean.co.uk
Pre-Motor Foam and
Felt Filter Kit
Post-Motor
Filter
Loading ...
Loading ...
Loading ...