Loading ...
Loading ...
Loading ...
- 7 -
04/2021
Copyright © 2021, Fast ČR, a.s.
EN
Food Processor
User'smanual
■ Prior to using this appliance, please read the user’smanual thoroughly, even if you already
have experience in using similar appliances. Only use the appliance in the manner described
in this user’smanual. Keep this user’smanual in asafe place where it can be easily retrieved
for future use.
■ We recommend saving the original cardboard box, packaging material, purchase receipt
and responsibility statement of the vendor or warranty card for at least the duration of the
legal liability for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Button for releasing the meat grinder
from the front attachment hub
A2 Removable cover of the front meat
grinder attachment hub
A3 A-shaped beater
A4 Balloon whisk
A5 Kneading hook
A6 Removable cover of the top blender
attachment hub
A7 Tilt-out multi-function head
A8 Attachment hub for mounting
attachments A3–A5
A9 Bowl cover with ahole for adding
ingredients
A10 4.5-litre stainless steel bowl
A11 Base unit
A12 Speed control knob
Serves to gradually set the speed level
MIN-1-2-3-4-5-6-MAX, set the pulse
level (PULSE) and to turning off the
appliance (OFF).
A13 Multi-function head release lock
A14 Anti-slip feet for stability of the
appliance during operation
A15 Lid
serves to close the stainless steel bowl
A10 for short term storage of processed
ingredients.
DESCRIPTION OF MEAT GRINDER ACCESSORIES
B1 Pusher
B2 Stainless steel hopper
B3 Feed tube
B4 Grinding chamber
B5 Screw shaft
B6 Grinding blade
B7 Screw ring
B8 Fine grinding plate
B9 Medium fine grinding plate
B10 Coarse grinding plate
B11 Separator
B12 Sausage stuffer attachment
B13 Moulder
B14 Conical attachment
B15 Cookie maker
B16 Cookie maker holder
Note:
Parts B11–B14 are contained inside the pusher B1.
Certain models are only equipped with ane and coarse grinding disc B8
and B10.
DESCRIPTION OF THE BLENDER ACCESSORIES
C1 Inner cap of the blending jar
C2 Outer lid of the blending jar with ahole
for adding ingredients
C3 Handle
C4 Glass blending jar with 1.5l capacity
C5 Cu
C6 Blade assembly
DESCRIPTION OF THE GRATING AND SLICING ATTACHMENT
D1 Pusher
D2 Feed tube
D3 Grating cone chamber
D4 Locking pin
serves to fasten the grating cone to
the chamber
D5 Very fine grating cone
D6 Fine grating cone
D7 Coarse grating cone
D8 Thin slice cut cone
D9 Thick slice cut cone
D10 Chute for directing grated food into
a container
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all accessory parts that are intended to come into contact with food using
warm water and aneutral kitchen detergent. Then rinse under clean running water and
thoroughly wipe dry with ane wiping cloth or allow them to dry naturally. After washing
and drying, we recommend to coat the grinding blade B6 and the grinding plates B8–B10
with cooking oil.
3. Do not submerge the food processor or its power cord in water or any other liquids.
Attention:
The metal parts of the meat grinder and attachments A3–A5 are
not intended for washing in adishwasher. Other removable parts
may be washed in adishwasher.
When handling the grating cones D5–D9, be very careful not to injure
yourself on their sharp blades.
BEATING, WHIPPING AND KNEADING
SELECTING ATTACHMENT TYPES
Attachment type Purpose of use
Beater A3
It is used for beating light and medium heavy yeast-free doughs,
for preparing sauces, creams, llings, etc. Do not use it for
kneading heavy doughs.
Balloon whisk A4
It is used for whisking whole eggs or egg whites, whipped
cream, foamy creams, etc. Do not use it for beating or
kneading doughs.
Kneading hook A5
It is used for kneading various types of doughs including heavy
and thick doughs such as for example bread dough, pizza
dough, fresh pastry doughs, etc.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
■ Before you start assembling or disassembling the food processor, check that it is turned o
and disconnected from the el. power socket.
1. Inserting the bowl and attaching the cover
1.1 Place the food processor on an even, dry and stable surface, for example on a kitchen
countertop.
1.2 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After tilting
out the multi-function head A7 release the lock A13. Locking of the multi-function head A7
inthe top open position is indicated by the lock A13 returning to the default position, which
is accompanied by an audible click.
1.3 Insert the stainless steel bowl A10 into the base unit A11 and secure it in place by turning it
clockwise. When the bowl A10 is properly attached, it cannot be separately lifted out of the
base unit A11.
1.4 On to the bottom part of the multi-function head A7 with attachment hub A8, slide the
cover A9 so that the latches along the perimeter of the round opening in the cover A9 slide
into the grooves along the perimeter of the attachment hub A8.
1.5 The lid A15 is used for covering the bowl A10 for short term storage of processed
ingredients.
2. Mounting attachments
2.1 When attaching an attachment, the multi-function head A7 must be locked in the open
position, see point 1.2 in the previous chapter. To attachment hub A8, attach one of
the attachments A3–A5 in such away that the attachment hub shaft A8 slides into the
attachment. Push the attachment towards the attachment hub A8 and turn it anticlockwise
to secure it in place. Lightly pull the attachment downwards with one hand to check that it
is properly attached.
2.2 Place the ingredients that you wish to process into the bowl A10. Release the lock A13 and
tilt the multi-function head A7 to ahorizontal position. After tilting down the multi-function
head A7, release the lock A13. The locked status of the multi-function head A7 in the tilted
down work position is indicated by the lock A13 returning to the default position. This is
accompanied by an audible click.
3. Disassembly
3.1 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After tilting
out the multi-function head A7, release the lock A13. Locking of the multi-function head A7
inthe top open position is indicated by the lock A13 returning to the default position, which
is accompanied by an audible click.
3.2 Push the attachment towards the attachment hubA8 andturn it clockwise to release it,
and then remove it. Turn the bowl A10 anticlockwise and remove it from the base unit A11.
Remove the cover A9 by pulling it downwards. Move the multi-function head A7 back to the
horizontal position.
USING THE FOOD PROCESSOR
1. Select the right type of attachment based on its intended use and assemble the appliance
according to the instructions in the chapter Assembling and disassembling the appliance.
Place the ingredients into the bowl A10.
Attention:
In asingle batch, it is possible to precess no more than 2.2 litres of light
dough or 0.8 litres of thick, heavy dough. The maximum number of egg
whites that can be whisked at once is 12. We recommend that you do not
ll the bowl A10 past the level of the 3l mark. If an insucient amount of
ingredients are put in the bowl A10 (less than 0.3 litres of dough), then
they may not be optimally processed.
2. Make sure that the multi-function head A7 is tilted down in the horizontal working position
and that the speed control knob A12 is set to the OFF position. Connect the power cord to
apower socket.
3. Set the required speed using the speed control knob A12. Gradually turn the speed control
knob A12 clockwise to increase the speed, turning it in the opposite direction will reduce
the speed. To initially stir in the ingredients, rst set alower speed and then adjust it as
required. Electronic speed regulation ensures that the set speed will be maintained under
various loads. While it is running, ingredients may be added into the bowl A10 through the
hole in the cover A9.
4. The pulse mode is used for increasing the speed to maximum for ashort time. To activate
the pulse mode, turn the speed control knob A12 to the PULSE position and to ensure
continuous operation hold it down in this position. As soon as you release the speed control
knob A12, it will automatically return to the OFF position.
5. If it is necessary to wipe ingredients o the inside of the mixing bowl A10 and the
attachment, rst turn o the food processor by setting the speed control knob A12 to the
OFF position and then disconnect it from the power socket. Wait until the rotating parts
come to astop and only then scrape away the ingredients with aspatula.
Loading ...
Loading ...
Loading ...