Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/13277321-stm-6378bk/bga.png)
- 10 -
04/2021
Copyright © 2021, Fast ČR, a.s.
Attention:
Under no circumstances should you attempt to process frozen food, nut
shells or hard stones that are found, for example, in mango or avocado.
2. Make sure that the food processor is correctly assembled and that the speed control knob
is set to the OFF position. Insert the power plug into an electrical power socket.
3. Place the the bowl A2 or another suitable container underneath the attachment. Use the
speed control knob to set the desired speed. We recommend to initially set the lowest
speed and then you may increase it as required.
4. Gradually add the ingredients into the feed tube B2 and push them through using the
pusher B1.
5. In the event that the attachment becomes blocked, turn off the food processor and
disconnect it from the power socket. Wait until rotating parts come to acomplete stop.
Remove the attachment and clean it out. Then assemble the attachment and reattach it
to the food processor. Connect the food processor to apower socket, turn it on and you
may continue working with it.
Attention:
When handling the grating cones B5–B9, be very careful not to injure
yourself on their sharp blades.
6. After you have finished using the appliance, set the speed control knob to the OFF position
and disconnect the power cord from the power socket.
7. Clean out the individual parts of the attachment after each use according to the instructions
in chapter Cleaning and maintenance.
CHOOSING THE RIGHT TYPE OF GRATING CONE
Food type
Slicing cone
B8–B9
Coarse
grating
cone B7
Fine grating
cone B6
Very fine
grating
cone B5
Fruit
Apples • • •
Pears • • •
Vegetables
Red and white cabbage • • •
Carrot • • •
Zucchini • •
Cucumbers • •
Celery • • •
Onion • •
Potatoes • • •
Radish • • •
Sweet potatoes • • •
Other foods
Hard cheese
(e.g. Parmesan cheese)
• • •
Chocolate • • •
Hard baked goods
(for breadcrumbs)
•
Nuts without shells •
Note:
The provided table only recommends the suitable type of grating cone for the
given type of food. If necessary, it is possible to use your preferred grating cone
for the given type of food.
The table includes the most common types of food that can be processed. However,
you can also use the grating and slicing cone for other types of food, for which it
generally applies that it can be normally cut using aknife.
CLEANING AND MAINTENANCE
■ Before cleaning the food processor, always switch it o by setting the speed control knob
A12 to the OFF position and disconnect it from the power socket.
■ Disassemble the food processor into its individual parts. Wait until moving parts come to
acomplete stop before disassembly.
■ Thoroughly wash the used removable parts after every use using warm water with aneutral
dishwashing detergent. Then rinse them under clean running water and wipe them dry with
ane wiping cloth or allow them to dry naturally. After washing and drying, we recommend
to coat the grinding blade B6 and the grinding plates B8, B9 andB10 with cooking oil.
■ If you whisked egg whites, rst rinse the bowl A10 and the beater A4 under cold water.
If you were to use hot water, the egg white remains would harden and their removal would
be more dicult.
■ Clean the mixing container C4 by lling it with 0.5 litre of clean water and afew drops of
kitchen detergent and then assemble the blender and run it for 10 to 15 seconds. Then turn
o the food processor, disconnect it from the power socket, and after the rotating parts have
come to astop, remove the blending jar assembly. Empty out the contents of the blending
jar C4 and then thoroughly rinse out the blending jar C4 with clean water and wipe dry.
■ If more thorough cleaning is required, the cu C5 with blade assembly C6 may be removed
using aspecial wrench that can be ordered free of charge at an authorised service centre.
After cleaning, it is necessary to install the cu C5 with blade assembly C6 back in its place
and to properly tighten it using the wrench.
Attention:
When cleaning, be very careful not to injure yourself on the sharp cutting
edge.
■ After every use, it is necessary to thoroughly clean any used attachments D6–D9 in
hot water and neutral kitchen detergent. Then rinse it under clean running water and
thoroughly wipe dry with ane wiping cloth.
■ The metal parts of the meat grinder, the blade assembly C6 and attachments A3–A5
are not intended for washing in adishwasher. Other removable parts may be washed in
adishwasher.
■ For cleaning the base unit A11 and the multi-function head A7, use acloth lightly dipped
in a weak detergent solution. Then wipe everything with a clean dampened cloth and
thoroughly wipe dry.
■ For cleaning, do not use solvents or cleaning agents with abrasive eects. Otherwise, the
surface of the appliance may be damaged.
■ Do not submerge the food processor or its power cord in water or any other liquids.
STORAGE
■ When not using the food processor, store it in a clean, dry place out of children’s reach.
Make sure that the multi-function head A7 is tilted down into the horizontal position.
TECHNICAL SPECIFICATIONS
Rated voltage range ............................................................................................................................... 220−240 V
Rated frequency...........................................................................................................................................50/60 Hz
Rated power input ........................................................................................................................................1 000 W
Noise level .......................................................................................................................................................85 dB(A)
The declared noise emission level of the appliance is 85 dB(A), which represents alevel Aof
acoustic power with respect to areference acoustic power of 1 pW.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric or
electronic products must not be added to ordinary municipal waste. For
proper disposal, renewal and recycling hand over these appliances to
determined collection points. Alternatively, in some European Union states or
other European countries you may return your appliances to the local retailer
when buying an equivalent new appliance.
Correct disposal of this product helps save valuable natural resources and
prevents potential negative eects on the environment and human health,
which could result from improper waste disposal. Ask your local authorities or
collection facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect disposal
of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the
necessary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product, request the
necessary information about the correct disposal method from the local council or from your
retailer.
This product meets all the basic requirements of EU directives related to it.