Loading ...
Loading ...
Loading ...
Open the power switch on the back
of the heater, the machine enters
the standby state,the indicator light
is on. press the " " button once,
the heater starts to work, and the
cold air is sent out, and press
this button again, the machine
enters the standby state.
Gear button
Pressing button is invalid in the
shutdown state.
Press button in the power-on
state to set the heater gear, and the
corresponding LED indicator will
light up to show the status
Swing button
Press button in the shutdown
state is invalid;
Press button in the power-on
state or press state to set oscillation
function. The indicator light of this
button is long time on to indicate
whether it is working or not.
Timer button
TIMER: In the power on state,
press the “ ” button, the timing
function is on, and the timing
indicator lights up. Press this button
continuously to perform the
cumulative adjustment, the timing
time is accumulated for 15 hours.
After the timing is set, the heater
enters the timed shutdown state.
After the time is up, the machine
automatically shuts down, all
functions stop working and the fan
will be turned off after 30 seconds.
Remote Control
Same as control panel
The remote control use one button
cells, model No. CR2025 (3V). We
recommend the use of Lithium type
battery for longer use.
0403
https://www.altonindustries.com
info@altonindustries.com
This heater is intended ONLY for
indoor household or office use.
It is NOT intended for industrial or
commercial use. Do not use outdoors.
PRODUCT
STRUCTURE
Handle
Rear Grill
Front Grill
LED display
Base
BRIEF INTRODUCTION
OF THE PRODUCT:
The fan heater of these series adopts
heating technology of PTC, it has a
high heating efficiency, centralized
heat and extensive usage.
TECHNICAL
PARAMETERS:
Model
Rated
Power
Rated
Voltage
Frequency
Class
II
EHT
150
1500W 120V~ 60Hz
CONTROL PANEL
ON/OFF button
Loading ...
Loading ...