CIRCULATING
HEATING FAN
MODEL:EHT150
USER MANUAL
Read and understand this instruction manual thoroughly
before using the product. It contains important information
for your safety as well as operating and maintenance advice.
ALTON INDUSTRY LTD. GROUP
643 Innovation Drive West Chicago, IL 60185
info @ altonindustries.com
https://www.altonindustries.com
MADE IN CHINA
4003094
CONTENTS
INTENDED USE
01
PRODUCT STRUCTURE
03
TECHNICAL PARAMETERS
03
CAUTION
05
PACKAGE LIST
06
WARRANTY
07
8. Do not operate any heater with a
damaged cord or plug or after the
heater malfunctions, has been dropped
or damaged in any manner. Return
heater to authorized service facility for
examination, electrical or mechanical
adjustment, or repair.
9. Avoid the use of an extension cord
because the extension cord may
overheat and cause a risk of fire.
However, if you have to use an
extension cord, the cord shall be No. 14
AWG minimum size and rated not less
than 1875 watts. When using an
extension cord, you must fully insert the
plug into the extension cord. Do not
use the extension cord if the plug
cannot be properly connected.
10. Do not run cord under carpeting.
Do not cover cord with throw rugs,
runners, or similar coverings. Arrange
cord away from traffic area and where
it will not be tripped over.
11. It is normal for the plug to feel warm
to the touch; however, a loose fit
between the AC outlet (receptacle) and
plug may cause overheating and
distortion of the plug. Contact a
qualified electrician to replace loose or
worn outlet.
12. Do not insert or allow foreign
objects to enter any ventilation or
exhaust opening as this may cause an
electric shock or fire, or damage the
heater.
13. To prevent a possible fire, do not
block air intakes or exhaust in any
manner. Do not use on soft surfaces,
like a bed, where openings may
become blocked.
14. Do not operate heater with any
safety guards removed.
15. Use this heater only as described in
this manual. Any other use not
recommended by the manufacturer
may cause fire, electric shock, or injury
to persons.
16. This heater draws 12.5 amps during
operation. To prevent overloading a
circuit, do not plug the heater into a
circuit that already has other
appliances working.
17. The output of this heater may vary
and its temperature may become
intense enough to burn exposed skin.
Use of this heater is not recommended
for persons with reduced sensitivity to
heat or an inability to react to avoid
burns.
“SAVE THESE INSTRUCTIONS”
0201
https://www.altonindustries.com
info@altonindustries.com
This heater is intended ONLY for
indoor household or office use.
It is NOT intended for industrial or
commercial use. Do not use outdoors.
IMPORTANT
INSTRUCTION
PLEASE READ AND SAVE
THESE IMPORTANT SAFETY
INSTRUCTIONS When using
electrical appliances, basic
precautions should always be
followed to reduce the risk of
fire, electric shock, and injury to
p e r s o n s , i n c l u d i n g t h e
following:
1. Read all instructions before using
this heater.
2. This heater is hot when in use. To avoid
burns, do not let bare skin touch hot
surfaces. If provided, use handles when
moving this heater. Keep combustible
materials, such as furniture, pillows,
bedding, papers, clothes, and curtains at
least 3 feet (0.9m) from the heater.
3. Extreme caution is necessary when
any heater is used near children, pets or
the disabled. NEVER leave heater
unattended while operating.
INTENDED USE
4. Use your heater only in dry
environments. This heater is not
intended for use in bathrooms, laundry
areas and similar indoor locations.
Never locate heater where it may fall
into bathtub or other water container.
Do not use your heater outdoors. Do
not use near sinks, swimming pools, or
other damp areas such as flooded
basements, garages, etc. or anyplace
where the heater could come in
contact with water.
5. A heater has hot and arcing or
sparking parts inside. Do not use it in
the areas where gasoline, paint, or
flammable liquids are used or stored.
6. To disconnect heater, first turn
controls to off, then remove plug from
outlet.
7. Always unplug heater by removing
the plug end from the outlet when not in
use. Never unplug by pulling on the
cord as this can damage the power
cord.
Open the power switch on the back
of the heater, the machine enters
the standby state,the indicator light
is on. press the " " button once,
the heater starts to work, and the
cold air is sent out, and press
this button again, the machine
enters the standby state.
Gear button
Pressing button is invalid in the
shutdown state.
Press button in the power-on
state to set the heater gear, and the
corresponding LED indicator will
light up to show the status
Swing button
Press button in the shutdown
state is invalid;
Press button in the power-on
state or press state to set oscillation
function. The indicator light of this
button is long time on to indicate
whether it is working or not.
Timer button
TIMER: In the power on state,
press the “ ” button, the timing
function is on, and the timing
indicator lights up. Press this button
continuously to perform the
cumulative adjustment, the timing
time is accumulated for 15 hours.
After the timing is set, the heater
enters the timed shutdown state.
After the time is up, the machine
automatically shuts down, all
functions stop working and the fan
will be turned off after 30 seconds.
Remote Control
Same as control panel
The remote control use one button
cells, model No. CR2025 (3V). We
recommend the use of Lithium type
battery for longer use.
0403
https://www.altonindustries.com
info@altonindustries.com
This heater is intended ONLY for
indoor household or office use.
It is NOT intended for industrial or
commercial use. Do not use outdoors.
PRODUCT
STRUCTURE
Handle
Rear Grill
Front Grill
LED display
Base
BRIEF INTRODUCTION
OF THE PRODUCT:
The fan heater of these series adopts
heating technology of PTC, it has a
high heating efficiency, centralized
heat and extensive usage.
TECHNICAL
PARAMETERS:
Model
Rated
Power
Rated
Voltage
Frequency
Class
II
EHT
150
1500W 120V~ 60Hz
CONTROL PANEL
ON/OFF button
Check for obstructions. Unplug the
heater for 30 minutes, clear any
obstructions and restart the heater.
NEVER attempt to open or service the
heater yourself. Doing so may cause
damage or personal injury.
CLEANING AND
STORAGE
Dust, dirt, pet fur, etc can diminish your
heaters performance and can lead to
u n w a n t e d o d o r s . F o r b e s t
performance clean your heater
frequently, at least once per season.
ALWAYS TURN OFF AND UNPLUG THE
HEATER BEFORE CLEANING.
Turn Heater OFF, unplug it and wait
for the heater to become cool.
Use a dry cloth to clean only
external surfaces of the heater.
A vacuum with soft brush may used
to clean louvered areas.
Wrap and tie the cord to protect it
from damage.
Repack the heater in its original
carton and store it in dry place.
NEVER attempt to open or service the
heater yourself. Doing so may cause
damage or personal injury.
0605
https://www.altonindustries.com
info@altonindustries.com
Note: Please follow battery disposal
instruction on battery packaging, or
contact your local councils for safely
disposal of batteries.
CAUTION
Use this heater only as described in
this manual. Any other use not
recommended by the manufacturer
may cause FIRE, ELECTRIC SHOCK or
injury to persons.
IMPORTANT SAFETY
FEATURES
This heater is equipped with an
AUTOMATIC OVERHEAT SAFETY
DEVICE that will turn off the power to
the heating element should the
internal temperature of the heater
exceed normal levels. If this should
happen the heating element will turn
off. To reset heater simply turn the
power to OFF. Unplug the heater and
allow the unit to cool for at least 10
minutes, clear any obstructions, set
the heater on a level surface. Then
plug the heater back in and turn the
power back to ON.
This heater is equipped with a safety
tip-over switch which automatically
shuts off the heater, if the heater is
not in the upright position. The heater
will work normally when the heater is
returned to the upright position.
TROUBLE SHOOTING
If your heater fails to operate, please
do the following:
Review these instructions to insure
yo u u n d e rs t a n d t he b a s i c
operations and features of your
heater. (Example: Overheat
Protection)
Check your circuit breaker or fuse
for proper operation.
PACKAGE LIST
CIRCULATING HEATING FAN x1
USER MANUAL x1
WARRANTY CARD x1
IR REMOTE CONTROLLER x1
Alton Industry Ltd. Group
This warranty covers any defects in materials or workmanship of the enclosed
product. Alton Industry Ltd. Group will repair or replace any defective materials due
to craftsmanship of the product. This warranty does not cover any problem caused
by misuse, abuse, accidents or acts of God, such as floods or hurricanes.
Consequential and incidental damages are not covered under this warranty.
Coverage terminates if you sell or otherwise transfer the ownership. If you feel you
have a defective product, please submit a copy of your receipt to the address below
and call 1-888-899-0146 for instructions prior returning this item to the store or
sending back to:
Alton Industry Ltd. Group
643 Innovation Drive
West Chicago, IL 60185
We will inspect the product and contact you within 72 hours to give you the results of
our inspection. We reserve the right to repair or replace the product at our discretion.
However, we may replace the product with one of similar but not exact features.
Parts and Service Information available call Alton Industry at 1-888-899-0146. This
warranty gives you specific legal rights. You may have other rights which vary from
state to state.
WARRANTY
07
https://www.altonindustries.com
2-Y EAR LIMITED WARRANTY
