Loading ...
Loading ...
Loading ...
English
English27
Operations
Control panel
01
02
10
11
03
04
05 06 07
08
09
01 Digital Graphic
Display
Displays all cycle information, including cycle time, information codes, and dryer
status.
02 Cycle Selector
Turn the dial to select a cycle. See the Cycle overview on page 28 for available
cycles.
03 Wrinkle
Prevent
Adds approximately 3 hours of intermittent tumbling at the end of the selected
cycle to reduce wrinkles. A large circle appears in display panel, and the drum
rotates intermittently. To activate, press Wrinkle Prevent. The corresponding
indicator blinks.
04 Dry Level
Press to select the dryness level in the SHIRTS, COTTON, MIXED LOAD, and
SYNTHETICS cycles. The dryness can be set in three levels (1-3). Level 1 is used to
partially dry items that lay flat or hang to dry. Level 3 is the strongest and is used
to dry larger or bulk loads.
05 Time
Press to adjust the cycle time for TIME DRY, and COOL AIR cycles.
The following time options (unit: minute) are available: 30, 60, 90, 120, and 150.
• 120 minutes and 150 minutes are not available for COOL AIR cycle.
• The exact drying time differs depending on the humidity of the load.
06 Damp Alert
This alarm is available only with COTTON, MIXED LOAD, and SYNTHETICS cycle. If a
load contains mixed fabrics, the Damp Alert indicator ( ) blinks when the average
dryness of the item is 80 % dry. This lets you take items that you don’t want fully
dried or that dry quickly out of the dryer early while letting others continue to dry.
07 Smart
Check
If the dryer has detected an issue, Smart Check allows you to check the status of
the dryer using a smart phone.
08 Drum Light
Press to turn on or off the interior lamp. The lamp stays lit for 2 minutes after it has
turned on, and then turns off automatically.
09 Sound On/
Off
Press to turn on or turn off the sound from the dryer. The sound setting is retained
when you turn the dryer off and turn it on again.
B-PJT_DV5000B_WEB_English.indd 27 2022/7/30 11:07:10
Loading ...
Loading ...
Loading ...