Loading ...
Loading ...
Loading ...
ToreducethechanceofFLASHBACKFIREyoumust
cleantheBurnerTubesasfollowsatleastoncea month
insummerandfallorwhenever spiders are active in your
area, and if your grill has not been used for an extended
period of time.
1. Turn all Burner Valves to the full OFF position.
2. Turn the LP Gas tank valve to the full OFF position.
For Natural Gas shut off NG valve.
3. Detach the LP Gas regulator assembly from your
gas grill. For Natural Gas detach NG regulator
from your grill.
4. Remove the Cooking Grids and Heat Diffusers
from your grill.
5. Remove the screws from the rear of each Main
Burner using a Phillips Head Screwdriver.
Remove screws along all sides of the Infra-red
Burner using a Phillips Head Screwdriver.
6. Carefully lift each Burner up and away from
the Gas Valve Orifice.
7. Check and clean burner/venturi tubes for
insects and insect nests. A clogged tube
can lead to a fire beneath the grill.
8. Refer to Figure 1 and perform one of these three
cleaning methods:
[] METHOD 1: Bend a stiff wire or wire coat
hanger into a small hook as shown and
run the hook through the Burner Tube and
inside the Burner several times to remove
debris.
.1
[] METHOD 2: Use a bottle brush with a
flexible handle and run the brush through
the Burner Tube and inside the Burner
several times to remove any debris.
[] METHOD 3: Use an air hose to force air
through each Burner Tube. The forced air
should pass debris or obstructions through
the Burner and out the Ports.
Regardless of which Burner cleaning procedure you
use, we recommend you also complete the following
steps to help prolong Burner life.
1. Use a fiber pad or nylon brush to clean the entire
outer surface of each Burner until free of food
residue and dirt.
2. Clean any clogged ports with a stiff wire, such as
an open paper clip.
Inspect each Burner for damage (cracks or
holes) and if such damage is found, order and
install a new Burner. After installation, check
to ensure that the Gas Valve Orifices are
correctly placed inside the ends of the Burner
Tubes. Also check the position of your Spark
Electrode.
For safe operation ensure the Gas Valve
Assembly Orifice is inside the Burner Tube
before using your grill. See Figure 1. If the
Orifice is not inside the Burner Tube, lighting
the Burner may cause explosion and/or fire
resulting in serious bodily injury and/or property
damage.
Tube Burner
Gas Valve Assembly Orifice BumerTube
Figure 1
TO CLEAN BURNER TUBE,
INSERT HOOK AS INDICATED BY THE ARROW
_ Burner Port Foot
uu_uuuuu_uuuuuuuuuuuu_uuuuuuuuuuuuuuuuuuuuuuuuuu_
_ Burner Tube
23
Loading ...
Loading ...
Loading ...