Kenmore 14816154211 gas grill

User Manual - Page 5

For 14816154211.

PDF File Manual, 29 pages, Download pdf file

Loading ...
Loading ...
Loading ...
LPTankExchange
Manyretailersthatsellgrillsofferyoutheoptionofreplacing
youremptyLPtankthroughanexchangeservice.Useonly
thosereputableexchangecompaniesthatinspect,precision
fill,testandcertifytheircylinders.Exchangeyourtankonly
foranOPDsafetyfeature-equippedtankasdescribedin
the"LPTank"sectionofthismanual.
AlwayskeepnewandexchangedLPtanksinuprightposition
duringuse,transitorstorage.
LeaktestnewandexchangedLPtanksBEFORE
connectingtogrill.
LP Tank Leak Test
For your safety
Leak test must be repeated each time LP tank is exchanged
or refilled.
Do not smoke during leak test.
Do not use an open flame to check for gas leaks.
Grill must be leak tested outdoors in a well-ventilated area,
away from ignition sources such as gas fired or electrical
appliances. During leak test, keep grill away from open flames
or sparks.
Use a clean paintbrush and a 50/50 mild soap and water
solution. Brush soapy solution onto areas indicated by arrows
in figure below. Leaks are indicated by growing bubbles.
Connecting Regulator To The LP Tank
1. LP tank must be properly secured onto grill. (Refer to
assembly section.)
2. Turn all control knobs to the OFF position.
3. Turn LP tank OFF by turning OPD hand wheel clockwise to
a full stop.
4. Remove the protective cap from LP tank valve. Always use
cap and strap supplied with valve.
OPDHand Wheel
Type1outletwith
threadon outside
Safety Relief Valve
/
Strap and Cap
If "growing" bubbles appear do not use or move the LP
tank. Contact an LP gas supplier or your fire department!
Do not insert a POL transport plug
(plastic part with external threads)
into the Type 1 tank valve outlet. It
will defeat the Safety Relief Valve
feature.
Do not use household cleaning agents. Damage to gas
train components (valve/hose/regulator) can result.
5. Hold regulator and insert nipple into LP tank valve.
Hand-tighten the coupling nut, holding regulator in a straight
line with LP tank valve so as not to crossthread the
connection.
Nipple has to be centered
into the LP tankvalve.
/
S
s
,f
/
Loading ...
Loading ...
Loading ...