Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
36
5.6 To Remove the Left-hand Oven Bottom and Top
Elements
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Bottom Element
Pull the cooker forward to access the cover boxes at the rear of the
unit. Remove the xings that secure the cover and lift it clear.
Remove the 2 screws ‘A’ and allow the plate to drop down (Fig. 10.8).
Remove the 2 screws ‘B’ holding the element to the bottom sheet
(Fig. 10.9). Undo the terminal connections, noting their positions.
Withdraw the element.
Replace the element and reassemble parts in reverse order.
Top Element
Open the left-hand oven door and undo the xings that secure the
heat shield. Remove the top element bracket xings and withdraw
the element.
Replace the element and reassemble parts in reverse order. Check
that the oven operates satisfactorily.
6 Doors
6.1 To Remove the Grill Outer Door Panel
Open the left-hand oven door and remove the 2 screws from the
bottom edge of the grill door.
Open the grill door, support grill door outer panel, and remove the 2
screws from the top inner face of the grill door.
Reassemble in reverse order.
6.2 To Replace an Oven Door
Open the oven door. Support the door and remove the 2 screws
securing the upper hinge and gasket to the cooker front
(Fig. 10.10). Remove the door from the lower hinge by lifting
slightly and moving outwards (Fig. 10.11).
n
The door is heavy, so take care.
Reassemble in reverse order.
Note: When replacing the door, make sure that the nylon hinge
bushes are in place in the top and bottom hinge brackets.
6.3 To Adjust an Oven Door Angle
The bottom hinge of either oven door can be adjusted to alter the
angle of the door (Fig. 10.12). Loosen the bottom hinge xing
screws and use the notch and a at bladed screwdriver to move the
position of the hinge to set the hinge position
(Fig. 10.13).
Retighten the hinge screws.
ArtNo.320-0006 Oven door hinge adjustment 1
Fig. 10.13
Eect of hinge adjustment – exagerrated for clarity
ArtNo.320-0001 Door hinges
ArtNo.320-0001 Door hing
Fig. 10.10 Fig. 10.11
ArtNo.320-0007 Oven door hinge adjustment 2
Fig. 10.12
Centreline of hinge pin
Oven door omitted for clarity
ArtNo.321-0007 - MF o en element 1
A
Fig. 10.8
ArtNo.321-000 - MF o en element 2
B
Fig. 10.9
Loading ...
Loading ...
Loading ...