Craftsman 358796121 line trimmer

User Manual - Page 10

For 358796121.

PDF File Manual, 22 pages, Download pdf file

Loading ...
Loading ...
Loading ...
KNOWYOUR TRIMMER
READ THIS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations with your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
Assist Handle
Trimmer Head
Coupler
Shaft
Line __,_//
Limiter Blade
ON/OFF Switch
Fuelfill
Throttle S Starter Handle
Trigger
ON/OFF SWITCH
Tile ON/OFF switch is located on the
trigger handle and is used to stop the
engine. Move the switch to the OFF
position to stop the engine.
CHOKE
Tile CHOKE helps to supply fuel to the
engine to aid in cold starting. Activate the
choke by moving the red choke lever to
the FULL CHOKE position.
Choke Spark Plug
Lever _/
Muffler
/
Primer Bulb Dipstick
PRIMER BULB
The PRIMER BULB removes air from
the carburetor and fuel lines and fills
them with fuel. This allows you to start
the engine with fewer pulls on the
starter rope. Activate the primer bulb
by pressing it and allowing it to return
to its original form.
COUPLER
The COUPLER enables optional at-
tachments to be installed on the unit.
BEFORE STARTING ENGINE
_,WARNING: Be sure to read
the fuel information in the safety rules
before you begin. If you do not under-
stand the safety rules, do not attempt
to fuel your unit. Call 1-800-235-5878.
OIL CAPACITY
The engine holds approximately 3
ounces of oil. Use only high quality
detergent oil rated with API service
classification SJ-SL Select the oil's
SAE viscosity grade according to your
expected operating temperature. For
most applications, SAE-30 oil is rec-
ommended. Do not use special addi-
tives.
,_.,_--. NOTE: Synthetic oil meet-
'\_
_ ing ILSAC GF-2, API certifi-;," '" cation mark and API ser-
,<._o,_j vice symbol (shown at left)
with "SJ/CF ENERGY CON-
O SERVING" or higher, is an
acceptable oil at all temper-
atures. Use of synthetic
oil does not alter required
oil change intervals.
SAE Viscosity Grades
i t I
t 2+0 ._o 70 7o _ J ;_
S+AR I iftO I E%I_ERATURE RA_IGE AN I CIFA ED P:mro_E I,E_ OIL C_AN6F
lO
Loading ...
Loading ...
Loading ...