Loading ...
Loading ...
Loading ...
User Manual
10
Installation Cont.
Electrical connection
• WARNING! It must be possible to disconnect
the appliance from the mains power supply; the
plug must therefore be easily accessible after
installation.
• Before plugging in your fridge, let it stand upright
for at least 2 hours. This will allow the refrigerant
gases to settle into the compressor and reduce
the possibility of a malfunction in the cooling
system.
• The appliance must be earthed. The plug of the
power supply cord is equipped with a contact for
this purpose. Do not under any circumstances cut or
remove the third (earth) prong from the power cord. If
the plug does not t your outlet, consult a licensed
electrician for advice to have the outlet changed.
• Plug the unit into a dedicated, properly earthed
wall outlet. Ensure that your outlet voltage and
circuit frequency correspond to the voltage
stated on the rating label.
• Secure the fridge’s supply cord behind the unit.
Do not leave it exposed or dangling to prevent
injury and accidental disconnection from the
power supply.
• When rst starting up, and after a period out of
use, allow the unit to cool down for at least 2–3
hours (4 hours if starting up during warm weather
in summer) before placing food in the fridge.
Reversing the door
• Unplug your refrigerator and remove all food
from the door shelves.
Remove all food from the inner door liner.
Fix the door by tape.
• Remove the top hinge cover. Using a screwdriver,
remove the top hinge assembly by unscrewing
the hinge screws
that secure it. Keep the screws for reuse.
• Lift the door can up and away from your
refrigerator. Unscrew the screws of the middle
hinge, remove the hinge and then lift the freezer
door up and away from your refrigerator. Save
the screws for reuse.
Instlltion (Continued)
8
8
Loading ...
Loading ...
Loading ...