Loading ...
Loading ...
Loading ...
28 electrolux care and cleaning
It is therefore a good idea to clean it
from time to time.
Turn off the water tap. Unscrew the
water inlet hose. Clean the filter using a
hard bristle brush. Tighten up the inlet
hose.
If the machine is exposed to temperatures
below 0°C, certain precautions should be
taken.
Cleaning the water inlet filter
Emergency emptying out
The dangers of freezing
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
Screw the pump cover fully in.
Close the pump door.
When the appliance is in use and
depending on the programme selected
there can be hot water in the pump.
Never remove the pump cover during a
wash cycle, always wait until the
appliance has finished the cycle, and is
empty. When replacing the cover,
ensure it is securely retightened so as to
stop leaks and young children being
able to remove it.
Warning !
Turn off the water tap.
Unscrew the inlet hose.
Place the end of the emergency
emptying hose and that of the inlet
hose in a bowl placed on the floor
and let water drain out.
Screw the water inlet hose back on
and reposition the emergency
emptying hose after having put the
cap on again.
When you intend to start the machine
up again, make sure that the room
temperature is above 0°C.
If the water is not discharged, proceed
as follows to empty out the machine:
pull out the plug from the power
socket;
close the water tap;
if necessary, wait until the water has
cooled down;
open the pump door;
clean the pump if necessary as
previously described;
replace the emergency emptying hose
in its seat after having plugged it;
screw the pump cover again and
close the door.
place a bowl on the floor and place
the end of the emergency emptying
hose into the bowl. Remove its cap.
The water should drain by gravity
into the bowl. When the bowl is full,
put the cap back on the hose. Empty
the bowl. Repeat the procedure until
water stops flowing out;
Loading ...
Loading ...
Loading ...