Loading ...
Loading ...
Loading ...
AdjustingCuttingDepth(Fig.W)
Themaximumdepthtravelofthecutting
headwassetatthefactory.Checkto
seethatthebladedoesnotextend more
than 1/4 in. below the table insert, and
does not touch the control arm throat
or any part of the base or table. If the
maximum depth needs readjusting:
1. Loosen the stop knob (1) while
moving the cutting head down until
the blade extends just 1/4 in. below
the table insert.
2. Adjust the stop knob (1) to touch the
stop plate (2).
3. Recheck the blade depth by moving
the cutting head front to back
through the full motion of a cut
along the control arm. If the blade
touches the inside of the control
arm, readjust the setting.
Fig. W
the Laser Trac®cutting guide using Class
Ilia laser beam. The laser beam will
enable you to preview the saw blade path
on the stock to be cut before starting the
miter saw. This laser guide is powered by
the transformed alternating current supply
directly through the power lead.
The saw must be connected to the
power source and the laser on/off
switch must be turned on for the
laser line to show.
Turning Laser Guide On (Fig. X)
1. To turn laser on, press on/off rocker
switch (1) to "ON" position.
2. To turn laser off, press on/off rocker
switch to "OFF" position.
Fig. X
2
THE LASER BEAM
(FIG. X, Y)
[,,_k WARNING]
For your own safety, never connect
the plug to power source outlet
until all the adjustment steps
are complete and you have read
and understood the safety and
operational instructions.
The laser beam must always be correctly
aligned with the blade to ensure straight,
even cutting. Your tool is equipped with
i,_ WARNING j
AVOID DIRECT EYE CONTACT
o Laser radiated when laser guide
is turned on. Avoid direct eye
contact. Always un-plug the miter
saw from power source before
making any adjustments.
o Laser Warning Label: Max. Output
< 5 mW Wavelength: 630-660 nm,
Complies with 21CFR 1040.10
and 1040. 11. Class Ilia Laser
Product. (Fig. Y)
=_ LASER RADIATION-AVOID
DIRECT EYE EXPOSURE
_x,0utput<SrnW Wavelength:63_0nm
Complieswith21CFR1040,10and104031
....................................• ...........................................................................c_ !=_L_!_od._
Loading ...
Loading ...
Loading ...