Loading ...
Loading ...
Loading ...
KNOW YOUR DETAIL BISCUIT JOINER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
REVERSIBLE FENCE
The reversible fence can be removed through key hole
slots and rotated t80 ° to change the angle of cut to 90° or
45°.
The fence should always be used to guide and balance
the biscuit joiner, providing ease of operation and main-
taining control.
BLADE
Your biscuit joiner has a t-1/2 in. 6-tooth blade for cutting
biscuit slots.
DEPTH ADJUSTMENT KNOB(S)
A spring-loaded depth adjustment knob makes it possible
to make proper settings for three standard size biscuits.
Fine adjustments to the cutting depth can be made with a
knurled adjustment knob and jam nut located behind the
depth adjustment knob. Once the correct depth setting
has been made for one biscuit size, the other two depth
settings will be automatically set.
HEIGHT ADJUSTMENT KNOBS
The height of the fence at 90° can be set between 0 - 3/4
in. from the center of the blade. The height of the fence at
45° can be set between 5/16 in. - 13/16 in. from the center
of the blade.
HEIGHT SETTING SCALE
A scale on each side of the fence indicates the height of
the fence from the center of the blade.
KNURLED ADJUSTMENT KNOB
Fine adjustments may be made by using the knurled ad-
justment knob and jam nut.
CENTERLINE/LINE OF CUT INDICATOR
Centerline and line of cut indicator marks help the opera-
tor make more accurate cuts.
NON-SKID SURFACE
The fence on the biscuit joiner has a non-skid surface to
help prevent misalignment caused by skidding during use.
It also prevents marring of the workpiece when making
cuts.
BISCUITS
Biscuits swell rapidly upon contact with water-based wood-
working glues and should be stored in a dry place. They are
available in three standard sizes:
R1 (7/32 in. x 5/8 in.)
R2 (9/32 in. x 3/4 in.)
R3 (1/2 in. x 1 in.)
This biscuit joiner is packaged with 25 R3 biscuits.
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
• Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
• If any parts are damaged or missing, please call
t -800-932-3188 for assistance.
PACKING LIST
Biscuit Joiner
R3 Biscuits (25)
Operator's Manual
a,
A
A
WARNING: If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: Do not connect to power supply until
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.
Loading ...
Loading ...
Loading ...