Loading ...
Loading ...
Loading ...
12
2
1
3
Remove the 2 screws securing
the valve panel to the unit using
a Phillips screwdriver.
Remove all dials by pulling outwards.
Pull the valve panel down then
outward and unplug any wires.
Removing the valve panel
LEAK TESTING
A complete gas tightness check must be performed at the installation site. Periodically
check the whole system for leaks, or immediately if the smell of gas is present.
When using a LP gas cylinder ensure it is installed in a vertical position to provide the
required vapor withdrawal.
Loading ...
Loading ...
Loading ...