1697,8804 SERIES
SafetyInstructions
ProductView/ Accessories
Features/ Operations
ConsumerServices
ReplacementParts
ug310-5944 1697 207.indd 1 2/20/07 3:03:11 PM
for buyinga BISSELLPowerSteamer
We're glad you purchased a BISSELL PowerSteamer deep cleaner. Everything
we know about floor care went into the design and construction of this
complete, high-tech home cleaning system.
Your PowerSteamer is well made, and we back it with a limited one-
year warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem, you'll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your PowerSteamer.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2 www.bissell.com 800.237.7691
ug310-5944 1697 207.indd 2 2/20/07 3:03:13 PM
IMPORTANTSAFETYINSTRUCTIONS
Whenusbganeleckicalappliance,basicprecautions
shouldbeobserved,induding the following:
:_eadall instructionsbeforeusingyour
DOWERSTEAMER®
/k WARNING:Toreducetilerisk
offire,electricshock,or injury:
• Do not immerse.
• Useonly on surfaces moistenedby cleaning process.
• Alwaysconnectto a properlygroundedoutlet.
• SeeGroundingInstructions.
• Unplugfromoutletwhennot inuseand before
conductingmaintenanceortroubleshooting.
• Do not leave machinewhen it is plugged in.
• Donotservicemachinewhenit ispluggedin.
• Do not usewith damagedcord or plug.
• If applianceis not working as it should,has been
dropped,damaged,left outdoors,or droppedinto
water,haveit repairedat anauthorizedServiceCenter.
• Use indoors only.
• Do not pull or carry by cord, use cord as a handle,
close door on cord, pull cord around sharp corners
or edges, run applianceover cord, or expose cord
to heatedsurfaces.
• Do not carry the appliance while in use.
• Do not unplug by pulling on cord. Unplugbygrasping
the plug,notthecord.
• Donothandleplugorappliancewilhwethands.
• Donotputanyobjectintoapplianceopenings,usewith
blockedopening,orrestrictairflow.
• Do not expose hair,loose clothing, fingers or body
parts to openings or moving parts.
• Do not pick up hot or burningobjects.
• Do not pick up flammable or combustiblematerials
(lighterfluid, gasoline, kerosene,etc.) or use in the
presence of explosiveliquids orvapor.
• Donotuseapplianceinanenclosedspacefilledw_ vapors
givenoffbyoilbasepaint,paintlhinna;,somemolhprodirg
substances,flammabledust,orotherexplosiveortoxicvapors.
• Donotpickuptoxicmaterial(chlorinebleach,ammonia,
draincleaner,gasoline,etc.).
• Do not modifythe 3-prong groundedplug.
• Do not allow to be usedas a toy.
• Do not usefor any purposeother than describedin
this User's Guide.
• Do notoperatethe applianceunlessthe beltdooris
securelyassembledinthe leca'donprovided.
• Useonlymanufacturer'srecommendedattachments.
• Useonly cleaningproductsformulatedbyBISSELLfor
useinthisapplianceto preventinternalcomponent
damage.Seethe cleaningfluid sectionof this guide.
• Keepopenings free of dust, lint, hair,etc.
www.bissell.com
• Do not pointattachment nozzleat peopleor animals
• Keepappliance on a level surface.
• Turnoff all controls before unplugging.
• Unplug before attachingthe TurboBrush_
• Beextra careful when cleaning stairs.
• Closeattentionisnecessarywhenusedbyornearchildren.
• WARNING:The Power Cordon this productcontains
lead,a chemicalknownto the State ofCaliforniato
cause birth defectsor other reproductiveharm.
Wash hand after handling.
SAVETHESE
INSTRUCTIONS.
GROUNDINGINSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current, reducing the risk of
electrical shock. The cord for this appliance has an
equipment-grounding conductor and a grounding
plug. It must only be plugged into an outlet that is
properlyinstalled and groundedin accordance with
all local codes and ordinances.
Grounded
WARNING:Improper
connectionof theequipment-grounding
conductorcanresultina riskofelectrical
shock.Checkwitha qualifiedelectricianor
servicepersonif youaren'tsureiftheoutlet
isproperlygrounded.DONOTMODIFYTHE
PLUG.Ifitwill notfit theoutlet,havea
properoutletinstalledbya qualified
electrician.Thisapplianceis designedfor
useona nominal120-voltcircuit,andhasa
groundingattachmentplugthatlookslike
thepluginthedrawingabove.Makecertain
thattheapplianceisconnectedto anoutlet
havingthesameconfigurationastheplug.
Noplugadaptershouldbeusedwiththis
appliance.
_his modelisfor householdusesonly.
Bi_E{[
800.237.7691
ug310-5944 1697 207.indd 3 2/20/07 3:03:13 PM
TurboBrush®
Storage _ # II I
(Select Models) _
l Flow Indicator
SmartMix® (Filter Inside)
Switch.._ i_j y _ "_-------Lower Handle
pD'o_t_frten_h_ _ rN_oozi2BeltAccess Doolr
Optional Accessories: Window
These items areavailablefor purchasewith your model.Toorder replacementparts or additional tools or
formulas, please referto page 19.
PreTreatWand
3" ToughStainBrush 4" UpholsteryTool TurboBrush® HardFloorTool
SprayingCreviceTool
MeshToolBag
4. www.bissell.com _ (bagonly) 800.237.7691
ug310-5944 1697 207.indd 4 2/20/07 3:03:14 PM
Keepplenty of genuine BISSELL
AdvancedCleaningFormulason hand
soyou can clean whenever it fits your
schedule.Always use genuine BISSELL
deep cleaning formulas. Non-BISSELL
cleaningsolutionsmay harm the
machineand will void the warranty.
-- Upper Handle
ToolCaddy
QuickRelease
Stain
_ Brush Storage
2-in-1 water
tank,,,
Nuts
FlexHose
4" Upholstery
ToolStorage
(SelectModels)
BISSELLFormulas:
48 oz,BISSELL 48 oz. BISSELL
FiberCleansing Multi Allergen
FormulaTM with RemovalTM
ScotchgardM PormuldMwith
Protector ScotchgardTM
Protector
www.bissell.com
48 oz.BISSELL 48oz,BBSELL48 oz.BBSELL 43 oz.BBSELL 32 oz, 22 oz,
PetOdorand%11 NaturalOrange LavenderE,%ence3XOoncerTtratedBISSELL BISSELL
RemovalTM FormulaExtractPormula Formula%th FiberCleansing HardFloor ToughStain
withScotchgardTM w_hSc/stchgardMScstchgard_ Formula%th SolutionsTM PreCbanerTM
Protector Protector Protector Scotchgard_ Formula
Protector
800.237.7691 5
ug310-5944 1697 207.indd 5 2/20/07 3:03:15 PM
to Use this Guide
This user's guide has been designed to help you
get the utmost satisfaction from your BISSELL
PowerSteamer. You'll find assembly and operat-
ing instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this guide thoroughly before
assembling your deep cleaner.
Payparticularattentionto the productdiagram,assembly
instructions,andpart names.Locateand organizeallparts
beforeassembly.Familiarizeyourselfwith the partsand
wheretheygo. Followingthis user'sguidewill greatly
enhanceyour abilityto getthe mostperformancefromyour
BISSELLPowerSteamerfor manyyears.
YourPowerSteamercomesin three,easy to
assemblecomponents:
UpperHandle
LowerHandle
ToolCaddy
Theonlything youwill needto assembleyour cleaner is
a Phillipshead(_'_ screwdriver.
w_
WARNING:
Do not plug in your
cleaneruntil you have
completelyassembledit per
thefollowing instructions
and are familiar with all
instructionsand operating
procedures.
1. Slide upper handleonto lower handle.
2. Feedbundled powercord through toolcaddy from
caddy'sflat side.
3. Align upperhandleholesand tool caddy holes.
4. Placehex nutintobackof toolcaddyand holdin
place.Insertboltfromfrontto backturning intothe
hexnut untilsnug.Donot overtighten. Repeatfor
the secondbolt andhex nut.
5. Insert2 screwsintolower 2 holes.Turnuntil snug.
6. Snaptools into storageon the tool caddy.
7. Wrap power cord and flex hoseas shown in
figure 7.
PowerSteamerassemblyis now complete.
3, 4,
6 www.bissell.com 800.237.7691
ug310-5944 1697 207.indd 6 2/20/07 3:03:24 PM
Special Features of Your BISSELL PowerSteamer
YourBISSELLPowerSteameris a homecleaning
systemthat usesa combinationofhottapwater,
BISSELLadvancedcleaningformulaandsuction
to safelycleancarpetsand upholstery.
DirtLifter_ PowerBrush
TheDirtLifferPowerBrushisdesignedto
enhancecleaningperformance.Thebristle
patternsafelyliftsoutthedeepdowndirtwhile
gentlygroomingcarpetfibers.Thefloating
suspensionself-adjuststo all carpetheights.
Whenthe poweris ON( I ) andthe machineis
inthe uprightposition,yourcarpetisprotected
becausethe brushesare liftedup offthecarpet.
SmartMix®
TheSmartMixfeatureautomaticallymixeshot
tap waterwiththeBISSELLadvancedcleaning
formula.Simplychooseoneof the3 settings
(hightraffic,normal,orwateronly)andthe
PowerSteamerwilladjusttherightamountof
cleaningsolutionto mixwiththewatertofit
yourcleaningneed.
Havinga separatesolutiontank fromthe
water tank allows nowaste of formula.
Becausethe water and solutionare stored
separately,they are not mixeduntilyouare
readyto clean.Whenyour cleaningjob is
finished,theformula can be storedreadyto
usein yourmachinefor the nexttime!
2-in-1 water tank
SmartMixbottle
Our2-in-1watertank systemisdesignedwitha
heavydutybladderinsidefor cleanwater.Asyou
clean,thecleanwaterinthebladderwillempty
andmixwiththecleaningformula.Dirtywater
pulledoutofyourcarpetswill collectaroundthe
outsideof thebladdersothatcleananddirty
waterarealwayskeptseparate.Thisallowsthe
userto maximizetank space,yetonlycarryone
tank toandfromthesinkfor emptyingandfilling.
www.bissell.com 800.237.7691
iiii_ i
ug310-5944 1697207.indd 7 2/20/07 3:03:25 PM
Features of Your BISSELL PowerSteamer
Flow indicator
Thisislocatedonthemachinebase.It spins
whenthetriggerispressedto indicatethat the
machineisapplyingcleaningsolutionto the
carpetandwillstopspinningwhenthe SmartMix
tankor Bladderneedstoberefilled,orwhenthe
triggeris released.
Note:Flowindicatordoesnot spinwhen
sprayingthroughtheattachmenthose.
ReadyToolsdial
Thisprovideseitherfloor cleaningorabove
thefloorcleaningwith theflip of a switch.If
choosingabovefloorcleaningfor upholstery,
stairs,or alongthe baseboards,choosethe
attachmentappropriatefor thejob. Attachtool
to the hose,and youare readyto go!
1.
2.
flowqaica_or
3.
4.
5.
Planactivities to give your carpet time to dry.
Movefurniture to another areaif cleaningan
entire room (optional).
Thoroughlyvacuumarea with a dry vacuum
cleanerbeforedeep cleaning.
Planyourcleaningrouteto leavean exitpath.It is best
to begincleaninginthe cornerfa_est fromyourexit.
Pretreating(optional)
Note:Prebeal_ngisrecommendedtoimprove
cleaningeffectivenessfor heavilysoiledcarpetin
hightrafficareassuchas enkywaysandhallways.
A. SpraytheBlSSELLToughStainPre-'_eatformula
ontoheavytrafficareas,soiledareas,orstains.
B. Allowto penetratefor at least3 minutes.
C. Followingthe instructionsbelow,cleanas
normal,usingthe BISSELLPowerSteamer
machineon the hightrafficsetting.
8 www,bissell,corn
ATTENTION:
SomeBerbercarpetshavea
tendencytofuzzwithwear.
Repeatedstrokesinthesame
areawith an ordinaryvacuum
ordeepcleanermay aggravate
thiscondition.Pleasesee Stain
Removalinstructionsonpage 14.
800.237.7691
ug310-5944 1697 207.indd 8 2/20/07 3:03:26 PM
Fill the 2-in-1 water tank
1. Releasethe handleand lay the machinehandle
back to access the Tank.
2. Removethe tank from the baseof the machine by
lifting the tank carry handle.
3. Carrylikea bucketto the sink.Rotatethehandle
forwardto unlatchthe lid.Liftoff andsetthe lidaside.
4. Fill up the bladderwith clean hot tap water.
*Do notboil or microwavewater as it can
destroythe bladder.
5. Replacethe top of the tank by matchingthe lid
and tank edges. Handlemust be in the forward
positionin orderto replace lid. Rotatethe handle
to the carrying positionto latch the lid.
Note:Rememberto securethe lidandtestto
makesureit issecurebeforepickingupthe tank.
6. Placetank intomachinebase,seatingfirmly in place.
Rotatetank handleback intolatchedposition.Bring
machinehandleback intouprightposition.
I:',I,I:L
Fill
1.
2a.
2b.
the SmartMix/formulatank
Liftthe formulatank upandout ofthe machinebase.
Fillthe formula tank byfirst unscrewingthe cap
and insert.AlwaysusegenuineBISSELLformulas
to maximizecleaningandfor thesafetyofyour
machine.Fillformulaup to the line andreplacethe
capand insert.Placeformulatank intothe slotinthe
back of the machinefora snugfit.
If usingthe BISSELL3XConcentratedFiberCleansing
Formula:Add3 capfulsof 3X ConcentratedFiber
!
Cleansingformulatothe formulatank,andthen fill I_
with warmwaterto the line. IZBWARNING:
Note: ff bottleleaks,checkfor properpositioning TOReducethe Riskd Fireand
of redgrommentandstraw insert. ElectricShockduetointernal
componentdamage,useonly
BISSELLcleaningfluidsintended
for usewiththe deepdeaner.
www.bissell.com 800.237.7691
ii
ug310-5944 1697 207.indd 9 2/20/07 3:03:27 PM
Choosethe SmartMixsetting
Simplychooseoneofthe3 settings
• HighTraffic
• Normal
• WaterRinse
andthe PowerSteamerwill adjusttheright
amountof cleaningsolutionto mixwith the
heatedwatertofit yourcleaningneed,
NOTE:Whenyourcleaningjobis finished,
theformulacan bestoredreadytouse in
yourmachineforthe nexttime!
Set ReadyToolsdial
Setready tools dial to the floor cleaning setting.
Powerswitch
1. Pluginto a proper outletand turn the power
switch to the ON( I ) position.Theswitch is
foundon the back of the handle.
/
SmartMix Dial
J ReadyToolsDial
i_'j ,
Cleaningstrokes
10 www.bissell.com
1. Whilepressingthe trigger,makeone slow forward
wet pass andanotherone back. Letthe formula
andDirtLifter PowerBrushdo the work for you.
Caution:Donot ovenNet.Takecare not to run
overlooseobjectsor edgesof arearugs. Stalling
brushmayresult in prematurebeltfailure.
2. Releasethetriggerandmakeoneslow forwardand
backwardpassoverthesameareato removeany
residualdirtywater,andaidin drying.Repeatcleaning
passesuntilsolutionbeingpulledupappearsclean.
Continuepasseswithout pressingthethggeruntilyou
can'tseeanymorewaterbeingpulledup.
NOTE: Both the SmartMix tank and the
clean water tank must have liquid in them
in order for the machine to spray. If one
tank is empty the machine will not apply
cleaning solution or water.
3. Aftercleaning,youmaywantto turntheSmartMix
dialto rinseto giveyourcarpetinga finalwateronly
rinse.Thiswillensurethoroughremovalof embedded
dirt loosenedbythedeepcleaningformula.BISSELL
deepcleaningformulascontainan anti-resoiling
agentthat helpsyourcarpetsrepeldirt andkeeps
themlookinggoodlonger
A WARNING:
Toreducethe risk of fire,
electric shock or injury,
unplugfrom the outlet
beforeservicing.
800.237.7691
ug310-5944 1697 207.indd 10 2/20/07 3:03:28 PM
_peration
EmptyThe 2-in-1 water tank
1. Removethe 2-in-1watertankfromthe baseusing
the tankcarryhandle.Carrythetanklikea bucketto
a utilitysinkoroutsidewhereyouwilldisposeofthe
collectionwater Removethetop ofthetankby rotating
thehandleforwardto unlatchlid andliftinglidoff tank.
2. Emptycollectionwater from bottomof tank.
NOTE: Youmay notice hair & debris deposits
on the carpet or in the tank that were
loosened bythe cleaning action (especially
with newer carpets that have never been
deep cleaned before). This debris shouldbe
picked up and thrown away.
3. After eachuse, removeand rinsethe lint screen
locatedon the tank lid.
4. Refill the tank in tank by referencing"Fill the 2-in-
1 water tank" on page 9. Rememberto securethe
top of the tank by rotatingthe handle and test to
makesure it is securebeforepicking up.
5. Return2-in-1 water tank to the machine.
NOTE:Always check the level of cleaning
formula in the SmartMix tank at the same
time, and refill as needed.
1,
3,
Rinse (optional)
Rinsing is an optional step that can be done
during the cleaning process by switching to the
water rinse setting,or it can be done after the
carpeted area has been cleaned.
1. Simplychoosethe water rinsesetting on the
SmartMixdial, and follow the samepath as you
did for cleaning,taking care to do a forward (wet)
strokeby depressingthe trigger, a backward (wet)
stroke,and a forwardand backward (dry)stroke,
releasingthe trigger. Continuethis until the water
yousee coming up the nozzleis clear.
1,
/ WARNING:
To reducethe risk of fire,
electric shock or injury,
unplugfrom the outlet
beforeservicing.
www.bissell,com 800.237.7691 11 /
ii
ug310-5944 1697 207.indd 11 2/20/07 3:03:29 PM
iintenanceandcare
Machinestorage
Onceyourcleaningiscomplete,makesurethe
2-in-1watertank isemptiedandrinsedout.Put
theunitaway ina closetorbasementfor the next
use.TheSmartMixtank canremainfilledand
readyto go(storewith machinesetto wateronly
setting),oritcansimplybeemptiedbackintothe
formulabottleifthat ismoreconvenient.
Note:Storecleanerina protected,dryarea.
Sincethisproductuseswater,itmustnotbe
storedwherethereisa dangeroffreezing.
Freezingwill damageinternalcomponents
andvoidthewarranty.
Machine Care
For best results, a few simple steps can assure
your machine iswell maintained after your
cleaning is complete.
1. Turnpowerswitch OFF( 0 ). Unplugthe machine
andwrap the power cord.
2. After emptyingthe 2-in-1 water tank, rinseit out
at a faucetwith runninghot tap water, taking care
to clean underneaththe heavyduty bladder,and
all around it. Cleanout lint trap.
3. Replacethe 2-in-1 water tankon the machine.
4. Cleanoutthe flow indicatorfiltereachtime it isused
to ensurebestcleaningperformance.Unscrewthe
flow indicatorcap,lift out the red rotorandwhite
filter.Rinseall _ree partswith water.Replacethe
filterand rotor.Replacethe flow indicatorcap.Turn
until snug,do notover-'tighten.
5. Anyloose hair or debriscan be pulledfrom the
brush roll if desired and thrown away.
6. Wipethe machine'sexteriorwith a soft cloth.
7. After carpet is dry,vacuum againto remove
hair and fuzz.
A WARNING:
To reducethe risk of fire,
electric shock or injury,
unplugfrom the outlet
beforeservicing.
3. \,_
©
12 www.bissell.com 800.237.7691
ug310-5944 1697 207.Jndd 12 2/20/07 3:03:29 PM
Maintenance andcare
YourPowerSteamer machine comes equipped
with a hose and at least one attachment for
cleaning stairs, upholstery, and more.
1. Important!If usingto cleanUpholstery,check
UpholsteryTags.
A, Checkmanufacturer'stag beforecleaning.
"W" or "WS" on the tag meansyou can
useyour PowerSteamer.If the tag is coded
with an "X" oran "S" (with a diagonalstripe
throughit), or says"Dry CleanOnly",do not
proceedwith any deepcleaningmachine.Do
not useon velvetor silk.If manufacturer's
tag is missingor not coded,checkwith your
furnituredealer.
B. Checkforcolorfastnessinan inconspicuousplace.
C. If possible,checkupholsterystuffing.Colored
stuffingmaybleedthroughfabricwhenwet.
D. Planactivitiesto allowupholsterytimetodry.
E. Vacuumthoroughlyto pickup loosedebrisand
pethair.Usea vacuumwith abrushattachment
anda crevicetoolto cleaninfabricfolds.
2. Followthe instructions on page 9 for filling the
2-in-1 water tank and the formula tank.
3. Setreadytoolsdial tothetoolsor pretreatsetting.This
will allowsprayanddivertthesuctiontothe hose.
4. SetSmartMix dial to normal.
5. Attach the cleaningtool to the end of the hose.
6. Plugin and turn on the powerswitch.
7. Cleanby pressingthe trigger to spray solution
onto the area to be cleaned.Slowly movethe tool
back and forth over the soiled surface.Release
the trigger to suction soiledwater.Continueto
clean in the area, working in small sections, until
no more dirt can be removed.Rinse(optional)and
suctionas needed.Caution:Dono overwet.
8. Whencleaning is complete,removeand rinse
tools in clean, runningwater.
9. Coilhosearound the tool caddy.
10. Empty2-in-1 water tank and rinse out, following
the instructionson page 11.
11. Returnreadytools dial to floor cleaning.
Manufacturer'stag
Z WARNING:
To reducethe risk of
injury,beextra careful
when cleaningstairs.
Make sure machine is
secure and level.
www.bissell,com 800.237.7691
0
iiii_ i
ug310-5944 1697207.indd 13 2/20/07 3:03:30 PM
ianing Fluid Section
Cleaningfluid section
KeepplentyofgenuineBISSELLFiberCleansing
FormulaTM onhandsoyoucancleanandprotect
wheneveritfitsyourschedule.Alwaysuse
genuineBISSELLdeepcleaningformulas.
A WARNING:
Toreducethe risk of fire
andelectricshockdueto
internalcomponentdamage,
useonly BISSELLcleaning
fluidsintendedfor use with
the deep cleaner,Non-
BISSELLcleaningsolutions
may harm the machineand
voidthe warranty,
48 oz.BISSELL 48 oz.BISSELL 48 oz.BISSELL 48 oz.BISSELL 43 oz.BISSELL3X
FiberCleansingFormulaTM MultiAllergenRemovalTM PetOdorandSoilRemovalTM NaturalOrange Conce_TtratedRber
%I7Sc/stchgardTM FormulawithScotchgardTM FormulawithScotchgardTM ExtractFormulawith CleansngFormula%th
Piotector Protector Protector ScotchgardTM ProtectorScotdTgardTM Protector
item # 0710 item # 0720 item # 0730 item # 0740 item # 0716
Stainremoval
Do not delay! Attending to an accident soon after
it occurs ensures the chances for full removal.
Leavingit for an extended periodof time may
cause it to set and become permanent.
1. Blotup liquidswith an absorbentcloth orpaper
towels. Whitematerialsarerecommendedbecause
certaindyes maybleed and makethe stainworse.
2. 6ently scrape up anysemi-solids with a spoonor
spatula. Do not usea knife or other utensilwith
sharp edgesbecauseit could damagethe carpet
or upholstery.
3. Ifthe area hasdried,removethe remaining
semi-solidsand residuewith asweeperor vacuum.
4. Besure to test anyspot removalformulasin an
inconspicuousarea first.This is importantas some
dyes and materialscould be damagedor discolored
bycleaningsolvents.If such a changeshouldoccur,
try a different solutionor call a professional.
5. Ifcleaningon Berbercarpeting, gently run your
machineover a hiddenarea. If no fuzzing occurs,
continue cleaningin soiled area.
6. Usingthe BISSELLTough Stain PreCleaner,spray
evenlyover soiled area.Do not overwet.Wait 3-5
minutes.Gentlywork the solution by blotting area
with a clean,damp, colorsafe cloth.
7. Cleanusing either the floor cleaning,or tools or
pretreatsetting on the readytools dial.
14 www,bissell,com 800.237.7691
ug310-5944 1697 207.indd 14 2/20/07 3:03:30 PM
Hard FloorCleaning ....
Hardfloorcleaning
Your PowerSteamer model may have come with
a hard floor attachment and Hard Floor Solutions
Formula. If not, these products are available for
purchase by contacting the BISSELLConsumer
Services department by phone or on the website.
The hard floor tool provides effective cleaning for
linoleum, vinyl, and tile floors.
Caution:Do not use on unsealed hardwood floors.
1. Vacuumor Sweepthoroughlyto pick up any loose
debrisand pet hair.
2. Moveanyfurniture, if needed.
3. Emptyany carpet cleaningformula back into the
BISSELLbottleif stored in the formula tank. Fill
formulatank with BISSELLHardFloorSolutions,
availableat many retailers, or contact BISSELL
ConsumerServices.
4. Fillthe 2-in-1 watertankwith hot tapwaterand
setaside.
5. Attachthe hardfloortoolonto thefloor nozzlewith
the longtab to the right sideof thefloor nozzle.First
attachleft side(shorttab)catchingtabover nozzle
edge.Gentlybendlongtab (right side)outwardto
easilysnapoveredgeof clearnozzleon left.
6. Setthe readytools dial to floor cleaning.
7. Setthe SmartMixdial to normalclean.
8. Pluginto an outlet and turn the powerswitch
ON(I).
9. Slowlymovethe machineforwardand backover
barefloor surfaceone timewhilepressingtrigger.
Caution:Do notoverwet.
10. Repeatthe motionwithout pressingthe trigger.
This allows the hard floor tool to squeegeeand
suctionup the dirty water.
11. Allow approximately30 minutesfor floors to dry.
12. Removehardfloor tool and rinseand dry
before storing.
13. If any formula remains in the formula tank,pour
it back into the HardFloorSolutions bottlefor use
the next time.
14. Rinseout the formula tank.
HardFloor
CleaningTool
BottomFrontEdge
of FloorNozzle
www.bissell.com
ug310-5944 1697207.indd 15
800.237.7691
2/20/07 3:03:37 PM
iubleshooting
RNING:
Reducedspray or no spray.
PossibleCause
1. Bladdermay be empty.
2. SmartMixtank maybe empty.
3. The filter maybeclogged.
4. Tanksmay not beseatedproperly.
5. Pumpmayhavelost prime.
6. The pumpbeltmay bebroken.
insert
Screwdriver
Bade Here
Remedies
1,
2.
3.
4.
5.
6,
Refillbladderwi1_hottapwater.
Fillwi1_BISSELLFiberCleansing
Formulaforcleaning.
Cleanoutflow indicatorfilter,
page12.
TurnpowerOFF(0); remove&
reseattanks.
TurnpowerOFF(0); after1
minuteturnONandpress
Trigger.
Turnthe machineOFF(0) and unplug
from the outlet.Tocheck if a pump
belthas broken,you will needa flat
headscrewdriver.Insertthe blade
endinto the lowerslot of the belt
accessdoorto releasethe lower
snap. If necessary,insert the blade
endinto the upperslot to releasethe
uppersnap.Examinethe beltfor
breakage.Youshould beableto
seethe pump beltloopedaroundthe
motorshaft. If it is brokenor missing,
pleasereferto ReplacementPartson
page19 before calling Consumer
Services.Completeinstallation
instructionswill accompanythe
replacementbelt.
16 www,bissell,com 800.237.7691
ug310-5944 1697 207.indd 16 2/20/07 3:03:39 PM
DirtLifter PowerBrushdoes not turn.
PossibleCause
1. The BrushBeltor PumpBelt
is off or broken.
Cleaner not picking up solution.
PossibleCauses
1. Readytools dial may beon the
wrong settingfor the cleaningjob.
2. Nozzlewindowmay notbe
properlyattached.
3. 2-in-1 water tank lid is not properlyinstalled.
4. 2-in-1 water tank is not properlyseated.
5. Poortoolposi'don,
(Handheldattachmentsonly).
6. 2-in-1watertankhaspickedup
maximumdirty water.
Remedies
Turnthe machineOFF(0) and unplug
from the outlet,Tocheck if the brush
beltor pump belt has broken,you
will need a flat head screwdriver.
Insertthe bladeend into the lower
slot of the belt accessdoorto release
the lower snap, If necessary,insert
the blade end into the upperslot to
releasethe uppersnap. Examinethe
beltfor breakage.If broken,please
referto ReplacementPartsonpage 19
beforecalling ConsumerServices.
Completeinstallation instructions
will accompanythe replacementbelt,
Remedies
1. Set readytools dial to eitheror
tools or pretreatfloor cleaning,
2, Pressdownfirmly on the black
oval gasket at the top windowto
makesure the two tabs onthe
backof the nozzlewindow are
snappedinto the matingslots in
the main housing,
3. Re-installlid;referto page9.
4. 2-in-1 water tank must befirmly
seatedto func'don;removeand
reseat2-in-1 water tank,
5. Adjustangle;applymore
downwardpressure.
6. Empty2-in-1 water tank, refer to
page11.
Other Maintenanceor Service not includedaboveshouldbe performedby an
authorizedservicerepresentative.
Thankyoufor selecting a BISSELLproduct.
Ifyoushouldhappento needassistanceduringassemblyoroperations,call1-800-237-7691
lPleasedonotreturnthisproductto thestoreJ
www.bissell,com 800.237.7691
ug310-5944 1697207.indd 17 2/20/07 3:03:39 PM
;SELLConsumerServices
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELLConsumerServices
1-800-237-7691
Monday - Friday 8 a.m. 10 p.m. EST
Saturday 9 a.m. 8 p.m. EST
Orwrits:
BISSELLHOMECARE,INC
POBox3606
GrandRapidsMI49501
A_N: ConsumerServices
Or visitthe BISSELLwebsite- www,bissell,com
WhencontactingBISSELL,havemodelnumberof unit available.
Pleaserecordyour ModelNumber:
Pleaserecordyour PurchaseDate:
NOTE:Pleasekeepyouroriginalsalesreceipt.It providesproofof dateof purchaseintheevent
ofa warrantyclaim.See"About YourWarranty"on page20for details.
18 www.bissell.com 800.237.7691
ug310-5944 1697 207.indd 18 2/20/07 3:03:39 PM
Replacementparts - BISSELLPowerSteamer
Belowa listof commonreplacementparts.Whilenotallof thesepartsmayhavecome
withyourspecificmachine,allareavailabletoyoufor purchase,ifdesired.
Item Part No.
210-9201
2 203-6655
3 310-1252
4 214-9131
5 214-9142
6 215-9155
7 015-9043
8 015-4439
9 015-9041
10 210-1785
11 210-1795
12 555-6503
13 214-9871
14 210-4052
15 215-0628
16 015-0621
17 213-3501
18 710A
19 720A
20 730A
21 0716
22 0484
23 222-0400
Part Name
4" SmallAreaTool
SprayingCreviceTool
TurboBrush®
HardFloorTool
PreTreatWand
ToughStainBrush
TankAssemblyCompletedncludeslidassembly)
TankLidAssembly
TankBottom
SmartMix® Tank(IncludesCap)
SmartMix® CapAssembly
FlowIndicatorCapAssembly
FloorNozzleWindowandGasket
WindowGasket
ReplacementPumpBelt(WithInstructions)
ReplacementBelt Brush(WithInstructions)
LintScreen
FiberCleansingFormulaTM 48 oz
Multi-AllergenRemovaFMFormula48 oz
PetOdorandSoilRemovaF_ Formula48 oz
3x ConcentratedFiberCleansingFormulawith
ScotchgardTM Protector43 oz.
HardFloorSolutionsTM 32 oz
ToughStainPreCleaneF_ 22 oz
1
17
2
<-.*_-.......
18
3
10
11
4
12 _
o
2O
21
6
15
22
7
16
23
www.bissell.com 800.237.7691
ii
ug310-5944 1697 207.indd 19 2/20/07 3:03:40 PM
- BISSELL PowerSteamer
Thiswarranty givesyou specific legal rights,and you mayalso haveotner rtcqts wntcn mayvary from state
to state. If you need additionalinstruction regarding this warranty or nave auesttonsregardingwhat it may
cover,pleasecontact BISSELLConsumerServicesby E-mail,telephone, or regular mal as describec below.
LimitedOneYearWarranty
Subjectto the *EXCEPTIONSAND EXCLUSIONSidentified below,upon receipt of the product BISSELL
Homecare,Inc.will repair or replace(with new or remanufacturedcomponents or products), at BISSELL's
option,free of charge from the date of purchase by the original purchaser,for one year any defectiveor
malfunctioning part.
See information belowon "If your BISSELLproduct should require service".
Thiswarrantyappliesto productusedfor personal,and not commercialor rentalservice.Thiswarrantydoesnot
applyto fansor routinemaintenancecomponentssuch asfilters, belts,orbrushes.Damageormalfunctioncaused
by negligence,abuse,neglect,unauthorizedrepair,or anyotherusenot in accordancewith the User'sGuideis not
covered.
IfyourBISSELLproductshouldrequireservice:
Contact BISSELLConsumer Services to locate a BISSELLAuthorized Service Center inyour area.
If you need informationabout repairs or replacement parts, or if you have questions about your warranty,
contact BISSELLConsumer Services.
Website or E-mail:
www.bissell.com
Usethe "Customer Services" tab.
Or Call:
BISSELLConsumerServices
1-800-237-7691
Monday - Friday8 a.rn. - 10 p.m. ET
Saturday9 a.rn. - 8 p.m. ET
Orwrite:
BlSSELLHomecare Inc.
POBox 3606
Grand Rapids MI 49501
ATTN:ConsumerServices
BISSELLHOMECARE,INC,IS NOTLIABLEFORINCIDENTALOR
CONSEQUENTIALDAMAGESOFANYNATUREASSOCIATEDWITHTHE
USEOFTHISPRODUCT,BISSELL'SLIABILITYWILLNOTEXCEEDTHE
PURCHASEPRICEOFTHEPRODUCT,
Somestatesdo notallow the exclusionor limitationof incidentalor consequentialdamages,sothe above
limitationor exclusionmaynot applyto you.
*EXCEPTIONSAND EXCLUSIONSFROMTHETERMSOFTHELIMITEDWARRANTY
THISWARRANTYISEXCLUSIVEANDIN LIEUOFANYOTHERWARRANTIESEITHER
ORALORWRITTEN,ANYIMPLIEDWARRANTIESWHICHMAYARISEBYOPERATION
OFLAW,INCLUDINGTHEIMPLIEDWARRANTIESOFMERCHANTABILITYAND
FITNESSFORA PARTICULARPURPOSE,ARELIMITEDTOTHEONEYEARDURATION
FROMTHEDATEOFPURCHASEASDESCRIBEDABOVE,
20 www.bissell.com
@2007 BISSELLHomecare,Inc
Grand Rapids,Michigan
All rights reserved.
Part Number 310-5944
Rev 02/07
Visitour website at:
www.bisselLcom
Scotchgard is a trademark of 3M
800.237.7691
ug310-5944 1697 207.indd 20 2/20/07 3:03:47 PM
