Loading ...
Loading ...
Loading ...
WWW.BIGASSFANS.COM © 2020 DELTA T LLC ALL RIGHTS RESERVED.
5
MAINTENANCE CHECKLIST
Spring cleaning
☑ Remove the cooling media and clean out any debris in the water pan at the
bottom of the cooler.
☑ Remove the distribution tube from the mounting clips. Remove the plug at the
end of the tube and flush out. Clean the distribution holes with a small brush
and flush with water to verify all holes are clear.
☑ If the cooling media is heavily stained with minerals or is damaged, replace
the media. Replacement cooling media is available at bigassfans.com. Verify
the media is installed correctly with the arrows on the side.
☑ Connect the water line and turn on the water supply. Check the float valve
and make sure it is operating properly. Verify that the float valve is shutting
the water o before walking away.
☑ Switch on the fan motor and pump. Make sure the cooling media is evenly
saturated with water. Small dry streaks are acceptable.
Mid-summer checkup
☑ Make sure the float valve is working properly. If the valve sticks, the water will
run continuously and flood the reservoir. If this occurs, install a new float valve
or contact Customer Service.
☑ Check all other working parts for cracks or damage, including the pump, fan
motor, and fan belt.
☑ Check the condition of the cooling media. The cooler runs most eciently
when the media is clean. If the media has a heavy accumulation of mineral
deposits, replace it.
☑ Use the drain valve to empty the reservoir. Remove any debris.
Winterize
☑ Clean the minerals from the reservoir. Vinegar can be used to dissolve
buildup. Flush out the reservoir through the drain plug.
☑ Inspect the water distribution tube for clogged holes. Clean as necessary.
☑ To prevent freezing in the cooler’s water line, disconnect the water supply,
and then open both valves on the side of the cooler to dry out the reservoir.
☑ Use a storage cover to protect your cooler and keep it clean.
Loading ...
Loading ...
Loading ...