Loading ...
Loading ...
Loading ...
11OPERATING INSTRUCTIONS
Note: Use this function only when cooling is
not desired, such as for room air circulation
or to exhaust stale air on some models.
(Remember to open the vent during this
function, but keep it closed during cooling
for maximum cooling efficiency.) You can
choose any fan speed you prefer.
During this function, the display will show
the actual room temperature, not the set
temperature as in the cooling mode.
Note: In this mode, the air conditioner will
work like a dehumidifier, but it will cool the
room down meanwhile. The temperature
can be adjusted between 62 °F (17 °C) and
86 °F (30 °C) and fan speed will be held at
“Lo”.
Note: In this mode, the unit will select Auto
fan speed automatically, and the selected
temperature will increase by 2 °F 30 minutes
after the mode is selected. The temperature
will then increase by another 2 °F after an
additional 30 minutes. This new temperature
will be maintained for 7 hours before it
returns to the originally selected
temperature. This ends the "Sleep" mode
and the unit will continue to operate as
originally programmed. The "Sleep" mode
program can be cancelled at any time
during operation by again pressing the
"Sleep", “Fan speed” or “Mode” button.
Note: This feature is a reminder to clean the
Air Filter (See Care and Cleaning) for more
efficient operation. The LED (light) will
illuminate after 250 hours of operation. To
reset after cleaning the filter, press the
"Filter Reset" button and the light will go off.
YOU WILL SEE:
DRY MODE:
YOU WILL SEE:
PRESS MODE BUTTON
CHOOSE DRY
DO THIS:
SLEEP FEATURE:
CHECK FILTER FEATURE, YOU WILL SEE:
YOU WILL SEE:
PRESS SLEEP
BUTTON
DO THIS:
Loading ...
Loading ...
Loading ...