Loading ...
Loading ...
Loading ...
14
Cleaning and Maintenance
Dusting behind the fridge and on the ground will improve the cooling effect and save energy. The interior of
the fridge should be cleaned to avoid any odor. Follow the cleaning procedure below:
1. Unplug the fridge.
2. Wipe the door seal with warm water.
3. Use soap and warm water to clean the fridge.
4. Reconnect the fridge when the fridge is clean and dry.
NOTE:
• Unplug the power plug from the socket before cleaning or defrosting.
• Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid, or alkaline items
for cleaning or defrosting as this may damage the surface and interior of the unit.
• For areas that are difcult to clean in the fridge (such as narrow sandwiches, gaps or corners), wipe
with a soft rag or soft brush. If necessary, use some auxiliary tools (such as thin sticks) to clean
these areas, making sure that no contaminants or bacteria are accumulated.
• Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect
electrical insulation after immersion.
DEFROSTING
1. Unplug the fridge.
2. Remove the food from the fridge and place it properly to prevent food from melting.
3. Clear the chamber with a soft cloth. Prepare the water container for defrosting. Pay attention when
cleaning the water draining tray of the compressor compartment. Avoid overow to the ground.
4. You can defrost naturally at room temperature, or use a plastic or wooden ice shovel to eliminate
the frost.
5. You can also use the appropriate amount of hot water to speed up the defrosting. Use a dry towel to
clean the water after defrosting.
6. After defrosting, store the foods back in the cabinet.
7. Power on the fridge.
Loading ...
Loading ...
Loading ...