Loading ...
Loading ...
Product Assembly
STEP 2a: Adjustment Tube Holder
Insert the preassembled ADJUST TUBE -
Assembly (2-ASM) from STEPS 1a-c, by pulling
out on the PULL-PIN LOCKING KNOB (13) and
slowly lowering onto the LEG WEIGHT HOLDER
- Assembly (1-ASM).
STEP 2b: Install Hold Down / Attachment Kit
Option
Attach the HOLD DOWN / ATTACHMENT KIT (F715)
to a BodyCraft bench of choice, either an F601, F605,
F705 or F708. Use the following hardware:
● Two HEX BOLTS, 1/2" x 4-1/4" (9)
● Four FLAT WASHER, 1/2" (11)
● Two NYLON LOCK NUT, 1/2" (10)
STEP 2c: “Torque Time”
Tighten all Bolts at this time to the Recommended
Torque Specs, as shown in the diagram to the right.
4 ft-lbs
(+/- 1 lbs)
20 ft-lbs
(+/- 2 lbs)
3
TIP: PULL-PIN LOCKING KNOB Instructions
3/4 SOCKET &
6” EXTENSION
3/4 WRENCHES
Recommended Tools
TORQUE WRENCH 3/8 DRIVE w/ 3/4 Socket & 7/32 Allen
Recommended Tools
Loading ...